hello guys, I try to kindly a file clock for marelli 8f.5t to point the first series 1.2 75hp.... I was convinced that I ritrovarmelo, instead, I've lost.... thanks to those that I post a working
hello guys, I try to kindly a file clock for marelli 8f.5t to point the first series 1.2 75hp.... I was convinced that I ritrovarmelo, instead, I've lost.... thanks to those that I post a working
hello this should do in case your
here's the thing. write to the file , remove silt box ,start the machine and put the files in.
I provatocon this fileno, but it works.... I detach the ecu code, turn the key, and the machine turns on the spiadell the injector normally, and does nothing moves strange.... however, when I do 16f, makes a strange noise as if it opens the injectors....
that means start the car???' I have to put it into motion with this file and then I put back the original one??Originally Written by jolidj
planet.... I opened the file but ? the same that has postasto joseph.... mistake I the procedure???
the procedure ?: unplug the cable box immobox, put this file, turn the ignition and leave for 30 seconds, close the picture, put his gold and put them on the bike,
you used one of the other memory?
this procedure, I've already done with this file yesterday... but as soon as I put in motion, the injector and the fuel pump part is slightly delayed from the usual.... after the normal time off, (the usual 7/8 seconds of those cars) and then does nothing.... like for example, if I turn on a framework to normal... I waited for a 40ina of seconds, after that I put the eprom in the original but nothing.... not to be in the bike.... when I do, instead, 16f, the light dell injector turn on and off.... in contemporary feel injectors that open on to the engine.....
the procedure is the same , I + do na botta start-up . I leave + 30sec on the framework and relaying the ori. 100%
ok, but you when you place ste 8f, you happen to hear the injectors that open??? I did one once.... and I remember that the injectors are opened as in the 16f.... and the light is logically turned on and off
Write permission
Quote