Page 1 of 2 12 LastUltima
Results 1 to 10 of 11
  1. #1
    BEGINNER
    Date Of Registration
    Jun 2013
    Messages
    36

    Opinion map Golf 5 1.9 Tdi 105cv

    Hi to all, kindly I would like to have your opinion on this map, I would like to know also if I have closed the EGR and if the warm start ? made to duty.
    Thanks in advance to anyone who will take it? help me.
    File Allegati File Attachments

  2. #2
    THE AVERAGE USER
    Date Of Registration
    Sep 2012
    Messages
    535
    The EGR is still open, warm start is fixed, but in an exaggerated fashion (have you done it with carsoft or time?). In this way, the car smokes a lot at start-up.
    For the map, for the little that I understand, I, pressure and limit turbo too high, and the same for torque limiters.

  3. #3
    BEGINNER
    Date Of Registration
    Jun 2013
    Messages
    36
    Thanks for your opinion cawadany, warm starting, I've done it with carsoft, time solves it in an appropriate manner? I try and use the time also for the EGR if your response to that ? positive.
    A greeting

  4. #4
    THE AVERAGE USER
    Date Of Registration
    Sep 2012
    Messages
    535
    The start-up's best to do it by hand. The EGR perhaps Time ago, but always best to check what you are doing.

  5. #5
    BEGINNER
    Date Of Registration
    Jun 2013
    Messages
    36
    I made another change, with this I should have placed the warm start and the EGR. You tell me if the limiters and turbo are ok?
    Thanks, hello!
    File Allegati File Attachments

  6. #6
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    329
    egr closed , warm start is done well but I don't know what you need , to have a warm start??? 0DFDC6 x 3 put them ori. the map after and important, lim turbo nn touched and the turbo pressure 90mb and shortly. anyway you can try it even so , you say as it is doing.

  7. #7
    BEGINNER
    Date Of Registration
    Jun 2013
    Messages
    36
    Ok thanks jolidj! I have problems (like many others) with the starter for this warm starting, I placed in the map. Then I put back golds in the address that you have given me, but what it refers to the map after? It's out of the drivers and ecm, I did not recognize.. torque limiters that I say, can go?

    Jolidj are you there? I gave 90mb why? these machines have a turbine gentle enough.. As a limiter turbo I would say to give on the 110 what do you say? Let me/let me know cos? the load and then tell you how it goes.
    Hello!
    Last edited by msport (exil77grande); 29-08-2013 at 11:22

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    329
    and you . 110 on the lim t go well. no one can sit behind the driver . the map after them by 10 % in the area of the pair, and stay in place. put ori maps that I have said and try it . please let us know.

  9. #9
    BEGINNER
    Date Of Registration
    Jun 2013
    Messages
    36
    Ok, thanks a lot jolidj, let's see if I understood, for the map after you intend to address 0E8794?

    I'm sorry jolidj but I'm not sure to have understood that the map you mean, perhaps from the 0EDF94? Please let me know.
    Last edited by msport (exil77grande); 31-08-2013 at 10:44

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Jun 2012
    Messages
    329
    the map after map and a hacksaw after the injection maps.

Page 1 of 2 12 LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •