seeking info for exclusion egr sid801

[magi1984]

as it says in the thread title, does anyone know how to exclude the egr on this ecu siemens sid801
the middle ? a peugeot ranch 2.0 HDI 90hp 5WS40146F-T. sw 9657544780 hw 9647423380

I still can't postar the original file, why? I don't have one, I only have the id

[msport (exil77grande)]

on the sid we have info but not on the 801,however, if as soon as possible and places the file ori give it a look.

[pinotec]

tap it and away.. it will not turn on no light and the car does not go into recovery,the maximum can see the error in diagnosis.

[pinotec]

anyway, the sid801/801a is not the laws with the usual tools..but the only write
here I have uploaded the file ori
http://www.professionalchiptuning.ne...=2393#post2393

some time ago I remapped a 307 hdi90cv always sid801
written without problems with flashteck

[magi1984]

you know that the usual systems are not the law,so I don't have the original file, and I'm waiting for Monday to make the request to the right people...since my**** pay for a service ? the right to exploit it! Thanks for your original file anyway! I will? definitely useful

[pinotec]

you know that the usual systems are not the law,so I don't have the original file, and I'm waiting for Monday to make the request to the right people...since my**** pay for a service ? the right to exploit it!

absolutely right.. but sometimes, for convenience, the first to look for it in the network, or make demands on the forums..

Thanks for your original file anyway! I will? definitely useful

I figured so much

[frantik3]

you can? read in boot mode with official tools and I think also with those who use you

[magi1984]

problem solved...
today I saw the car in person going in the workshop with my client, the egr ? MECHANICAL, and then, as it says in pinotec ? been cleaned and sealed!
among other things, the problem was on the tube of the depression that was washing, and then the egr is not working properly

[pinotec]

glad that you fixed it.. so nothing mappettina?

[magi1984]

for now, no, the customer only wanted to solve the problem at egr