Scodifica bosch MP9.0 seat ibiza

[angelo]

Hi should I make a scodifica an ecu bosch mp9.0 mounted on a ibiza , does anyone know if should be made on the flash (87c510) or on the eeprom a 24c02???
Thanks

[scinti]

You need to work on the 87c512 for the total hi

[angelo]

Thanks 10000

[scinti]

I figured hello

[angelo]

I'm sorry, I have a 87c510 mounted and not 87c512, but these I don't have the adapter, but I read that I could put a 27c512 with a socket converter mounted on the ecu. Do you find it??
Thanks

[scinti]

I don't know and respond to controls on http://www.alldatasheet*****/?gclid=C...FQeW3godYz8AKQ

[gezame]

You need to work on the 87c512 for the total hi

Hello
You can also do the 24c02 without problem.

[angelo]

I don't know and respond to controls on http://www.alldatasheet*****/?gclid=C...FQeW3godYz8AKQ

I confirm that ? a 87c510 that you can? replace planning a 27c512 but it takes a socket convertor that I have not...
Thanks anyway

[angelo]

Hello
You can also do the 24c02 without problem.

You say?? I understood that on the 24c02 was only partial,I can try to post the reading I do a test (I don't have here in the middle)

[scinti]

I also confirm the 27c512 with program otocheck