traction control

[cjack]

hello guys! I'm trying to turn off the traction control(by cutting the flow of fuel) in a 147 mjet(edc16), but to leave the traction control that is performed by actuating the automatic brake...
I found some address interesting in the damos... you have made some test about it?

[mariodarkblue]

hello guys! I'm trying to turn off the traction control(by cutting the flow of fuel) in a 147 mjet(edc16), but to leave the traction control that is performed by actuating the automatic brake...
I found some address interesting in the damos... you have made some test about it?

Hi...honestly I don't find useful the thing...in the end, the asr can be off by a special key, while the esp is not ? can be turned off...anyway, if you want to also disable the asr do not press the tastino..su I knew edc15 farlo....su edc16..I never tried...what do you want?

[angelolsp]

then you can turn off everything right now...I don't understand where you want to act...you have created the button for the esp and then you have the x-l asr...you have not turned off so

[cjack]

I wanted to make the q2 electronic... esp the take off, sending a failure in the vdc... or take it off the power to the yaw sensor under the dash(I've put a switch)

[angelolsp]

indeed, the asr the disattii when you want to...

[cjack]

the asr I don't want to take it off completely... I just want that only acts on the brakes and not on the engine by removing power

[angelolsp]

understood.....

[cjack]

maybe I have found the bit to enable/disable the asr and msr, but I know that you completely disable...

[angelolsp]

I think of you...I wonder recognizable partially agira in part on the brakes, and so parlziale on the power of the engine if always you can disable part

[cjack]

I don't know what they mean and the second two... does anyone know?