-
Problem temperature mercedes cla 180cdi
Hi,guys I have a problem with a class 180CDI,on the road, and the hand of the temperature always remains in the initial position, i.e. up to 40 degrees.I connected the diagnosis and accelerating from a standstill at 3000 rpm, a constant temperature rises gradually.Starting from a temperature of 18 degrees, the flow rate of 65 degrees, taking about 30 minutes and I noticed that the instrument panel coincides with the values of the diagnosis.I changed the thermostat thinking it was stuck open and also the water temperature sensor but it's not changed anything.I don't know what to think.
-
THE AVERAGE USER (OF)
see that probably remains the thermostat is always open and tends to remain low temperature
-
mercedes a class 160
I ? arrived in the workshop girl saying that it was blocked in the steering....the a-class.
I tried to make a diagnosis, but then I saw that ? diagnosable that, c'? just a classic pump and that's it.
there ? ever happened to you that you block these?
-
As already mentioned, the thermostat I changed it, but nothing, the problem remained.
With regard to the problem of michele30, if the vehicle is a class a model w168 most of the cases it is the pump that hangs on the need to replace.
-
sure, so, today, I have changed a, in the winter if you change several of these thermostats in general.
-
THE AVERAGE USER
The terms and conditions of the fan? ? stops, or for the case always turns?
-
But the pipes are cold or warm.
So the problem usually happens when it circulates the water or fan on all the time. 't tell the pump that should not be why? should go in the ebolizione.
However, you feel the same pipes and see if they are all hot, I would not like to not circulate well
-
Not the fan and stops .The pipes before it heats the top and then starts to warm up the lower one.
-
so, let's say that the thermostat is working.
but if on the road with the machine already hot go with the diagnostic tool with the parameter on temperature, what happens?
-
On the road I didn't try it with the diagnosis,but found that the temperature on the instrument panel does not move.
Write permission
- You you can not post new threads
- You you can not send answers
- You you can not send attachments
- You you can not edit your posts
-
The rules of the Forum