Linearization and replacement sensors AUDI TT MK1.....

[Emanuele54]

Hello all,
I have to map a AUDI TT MK1 (first series), and I have recommended to replace the sensors from the original:


valve n75 race
that would be the old RS4 biturbo and the by-pass valve of the pop.
change the APS with a 051c derivation of the tdi 130/150 hp"
but I say to linearize....unfortunately I do not s? do it to me you explain it ?
and also, according to you, these sensors are to be good?
the bypass valve of the pop, it would be the pierburg?
you would have the codes bosch of these sensors?

Thanks

[explode82]

for the linearization, you first need to get some of the technical features of both the original ones and those that you want to mount to replace then the values referenced in the map.............after that, you will get six you can? start to do something on the map

[Emanuele54]

so I have to first get the sensors (valve n75 race RS4 biturbo and the by-pass valve of the pop, the sensor APS051c derivation of the tdi 130/150 hp") and the original maps of the 2 cars from which I take the sensors!

correct?

I try everything and bring forward to the discussion.......hopefully not take too long to find the material!

Thanks

[explode82]

exact,but specifically, you need the technical data of the things that you want to replace