info for jimny 65 hp

[tuommo89]

hi to all...I should map the jimny my friend, on mpps on gallo v2 , I have the voice of the jimny , how could I read it?
if I can't read this , when I go to write I have to recode the injectors? thanks in advance to all =) =)

[elettro72]

hello, I was doing the same question......have you solved it? I know that mounts the engine of the renault......on the database I know that you read with kess....I am interested too thanks

[admin]

Should be like the Clio,so try with this

[elettro72]

then read it with mpps using clio as a reference file ? this can someone kindly give a look if ? ok?

[msport (exil77grande)]

then read it with mpps using clio as a reference file ? this can someone kindly give a look if ? ok?

the file is ok.

[elettro72]

well then in theory I could also write it always with the protocol clio....now, I wonder ? risky ,ce the loss of coding the injectors,or you can go fairly quiet? always with mpps of course.....the file that I read ? a jimny 2004, I put it in the database, or think us admin thanks

[tuommo89]

guys I've read with rooster v2, and the file ? of 40kb...... I don't read in full....what do I do?

[mafani]

guys I've read with rooster v2, and the file ? of 40kb...... I don't read in full....what do I do?

you have read only the tables and check that there are maps and are affixed

[explode82]

of course, you read it by 40 and that size is not recognized by the titanium,then you have to edit everything by hand, using the 2d graphics

[angelo]

of course, you read it by 40 and that size is not recognized by the titanium,then you have to edit everything by hand, using the 2d graphics

Sorry there is a system to recognize the titanium map read with the cock 40 kb??
Or the only system ? make it by hand in 2d
thanks