Fiat grande punto 1.3 mjt ecu nevertheless, 8f2.g1 -mm 51904061

[vince59]

I did a little bit of confusion with the thread and the information gathered, and then I have to start from scratch.
I would like to put his hand on a Grande Punto MJT 1.3 but I have the car available at the time.
The control unit is marked as NEVERTHELESS, 8F2.G1 - 51904061 but I read it for the reason stated above.
Now from what I understand, this ECU is not as easy as the EDC15C7, so I want to be sure not to break it on the first attempt.
Now my questions regarding:
Software:
- the information I have sufficient to search for the file ori, and start to study or you need to log on and actually read the ECU in order to get more information?
- there are different versions of the software for this ECU?
- I downloaded the file from the file section ori (flash only) and I am using Titanium to open it but when I go to the point I have the driver but I don't know which one to choose;
- the same situation with winOLS. I opened the file, but I have not experience to find maps; they are Not able to find the mappack.
hardware:
- unfortunately, I only have tools chinese and I don't want to use them unless it can do damage. I am looking for a suitable tool. It appears that Kess is the best, but there are too many versions that vary in price and I don't know which is the suitable one;
- I see that sometimes the suggested option is to use JTAG or BDM. I'm not sure how to work on this ECU, but I would prefer NOT to open but to work with the OBD.
- usually work on a ECU of the reserve, and I will buy another. I guess that will not work if connected to my car for the immo or stuff like that. So the question is ... do I have to "clone" this ECU in any way? The ECU has a eeprom to desolder...flash or what else?
Thanks a lot to all of you who give some advice.

[vince59]

no one can help me?

[vince59]

aho mm ndò been?

[dj_piex]

what do you want to know exactly ? I didn't understand sincerely what you want to do..