Exclusion DTC EGR Marelli 1.3 MJT 70Cv

[alex210392]

hi guys I wanted to know how to disable the dtcs relating to the egr since I removed physically, or at least how to calculate the address from the lead to 0 thanks in advance
p.s. the car in question is an opel corsa C 1.3 CDTI the file ori is posted already in the database and below I report the link

http://www.professionalchiptuning.ne...7&d=1494486184

[Errecinque]

Error code diagnosis?

[alex210392]

Error code diagnosis?

code P0403

[Errecinque]

code P0403

it usually works as well

[alex210392]

it usually works as well

hello Errecinque thank you so much for the support, I tried, in diagnosis does not appear the error, but is the MIL on, without giving me any error in diagnosis

[Errecinque]

hello Errecinque thank you so much for the support, I tried, in diagnosis does not appear the error, but is the MIL on, without giving me any error in diagnosis

Then with winols display, 16-bit hex Search for the value 0403. You'll see that just before the first Bit cleared to me there is another one that refers to the lamp light. Now, unfortunately, I do not have the pc, try you should still be able

[alex210392]

Then with winols display, 16-bit hex Search for the value 0403. You'll see that just before the first Bit cleared to me there is another one that refers to the lamp light. Now, unfortunately, I do not have the pc, try you should still be able

hello R5, unfortunately, I followed your advice and I cleared all the 0403 hex, but nothing to do, thanks again for the support and best wishes for a merry christmas

[Errecinque]

hello R5, unfortunately, I followed your advice and I cleared all the 0403 hex, but nothing to do, thanks again for the support and best wishes for a merry christmas

Strange...can you post your change???

[alex210392]

sure here it is p.s. I have copied your advice on the file that I have in the ecu now

[Errecinque]

sure here it is p.s. I have copied your advice on the file that I have in the ecu now

You should try file ori only with the bits 0403 reset (at the bottom of report it ori nothing to do with the area of dtc), because, according to me, the light will turn on for other reasons related to the mod, you have touched some strange things