map 1.3mtj70cv mod... with problems in the starting

[michell]

hello I wanted some advice and some helping hand to resolve a problem that I'm having
and also in the council saw that I'm sending in changes different from the normal with turbines of different rails and the big...
I have followed the discussion of the 1.3 mtj 70cv , I've made the changes mentioned and the end result is a map that works and one that does not start and I can not get out of it ...
mounted turbine 95cv and comrail 95cv and injectors 95cv .
well, the car works perfect I have a peak of 2bar and a constant 1.6/1.7 row and a wonder, but came to 4000
about the walls and 185 stops ....
issue I would like something more you are low and I would like a little more you have high ,because I see some macchinucce that with a little spin well....
give me a tip I would like to understand if I did some mistake...
map n°4 works map n°6 does not start why?????

[alex210392]

azz.. I with a map made "a just and terr" and turbine giulietta 1.6 with rail and injectors, ori the arrival of 190 km/h but I know that I should give more all with a stroke of 1.3, according to my opinion you should give more diesel to the high, then waits for advice from the more experienced

[michell]

azz.. I with a map made "a just and terr" and turbine giulietta 1.6 with rail and injectors, ori the arrival of 190 km/h but I know that I should give more all with a stroke of 1.3, according to my opinion you should give more diesel to the high, then waits for advice from the more experienced

thank you for your interest in have you seen the map '???
as ever, the other step 6 the car will not start???
you could give me some idea..

[alex210392]

thank you for your interest in have you seen the map '???
as ever, the other step 6 the car will not start???
you could give me some idea..

no unfortunately I still have to give us an eye because on the pc from which I write I do not have the programs, tonight I will see and what little I can understand I will give you directions in the meantime wait for someone better than me give you advice

[michell]

[alex210392]

I gave a quick look and I noticed that between step4 and step6, there are differences on the axes of rpm try to bring them gold ones and see if you part in some places I have also seen the values of 6500 and the 7000, and a diesel at those revs sbiellato by a piece...... try to follow my board and see if it starts, advances, and time as you have them calculated?

[alex210392]

begins with the return to gold the following bits to the following addresses
65444
65456
65458
654bc
and then check that it is not the limiter popcorn 689a8 not to leave, for the rest nn I see big differences