Hello to all,following a modification to the intake manifold(elimination of swirl),the control unit detects the values out and send in protection for the engine,with my tools I can not read this kind of ecu,delco mt35e,have you ever had?there is a dedicated tool?thank you all in advance!
Strange to me on the z14xep I have blocked, and not by any failure..
you can not monitor a lot about the swirl.. he has the air mass meter 1.6?
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Yes,it has the air mass meter,I have physically deleted the palette to issues of noise,by modifying the manifold,there is the pneumatic valve that regulates the movement of the valves and a sensor that reads the position of the butterflies.
Practically I wanted to delete the dtc or bypass that function from the ecu but I think it is difficult!
That is.. I assume is the air mass meter to identify the tampering of the Swirl..Originally Written by Dany88
the 1.4 has no Maf and no error..
Heee maybe slowing down the air flow??
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Hello a question, but the collector was not repairable?,or replaceable?
Hello everyone!I just wanted to report that the ecu in the zafira I was able to read it with carprog!delco mt35e.
And so you're able to delete the DTC?
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Write permission
Quote
