Page 1 of 6 123 ... LastUltima
Results 1 to 10 of 52
  1. #1
    BEGINNER
    Date Of Registration
    Sep 2012
    Messages
    52

    Problem Passat EDC15 115hp

    Good Afternoon..

    This morning a friend asked me if I could resolve a problem on his passat ,which came after the mapping,which in practice has the light of the glow plugs that flashes all the time... and the hang-up appears, "engine failure".i made a diagnosis, and I have come out the following errors:

    Address 01: Engine Labels: 038-906-019-AJM.lbl
    Part No: 038 906 019 AJ
    Component: 1,9l R4 EDC 0000SG 1305
    Coding: 00002
    Shop #: WSC 00012
    VCID: 5FC7D2D8DD26836

    1 Fault Found:
    00000 - End of output
    35-00 - -
    Readiness: 0 0 X X X
    and
    Address 19: CAN Gateway Labels: 6N0-909-901-19. lbl
    Part No: 6N0 909 901
    Component: Gateway K < - > CAN 0001
    Coding: 00004
    Shop #: WSC 00028
    VCID: F0E52164B0B88CE

    1 Fault Found:
    01044 - Control Module (Incorrectly Coded
    35-00 - -
    I tried to delete them the most? times but promptly reappear.

    I have read the ecu and then I compared the serial written on the ecu with those read by obd. and I noticed that they are different.
    Can this be the reason of these errors??
    I can reset the ecu by simply typing the original file of the ecu?
    It is an operation that I have to do the tour in the boot or can I do it from the obd without having to remove the ecu?
    Last question mica risk of losing the code immo?
    sorry for my questions from a newbie, but I have many doubts about that and I would not want to do pi? casini those who are already? been made.

    thanks
    Last edited by virus1976; 24-10-2012 at 09:15 Reason: I was wrong to bring back the hp of the car

  2. #2
    Banned
    Date Of Registration
    Sep 2012
    The resort
    Piemont
    Messages
    432
    I did not understand but did you mod?
    Last edited by alfajtd; 23-10-2012 at 17:16

  3. #3
    BEGINNER
    Date Of Registration
    Sep 2012
    Messages
    52
    no alfajtd, the machine ? been modified by a tuner in my area but I don't know who he is

  4. #4
    Banned
    Date Of Registration
    Sep 2012
    The resort
    Piemont
    Messages
    432
    there seems to be a configuration error airbag

  5. #5
    BEGINNER
    Date Of Registration
    Sep 2012
    Messages
    52
    I tried to do the encoding with the vag, but I do not do anything
    Then the curious thing, and that on the ecu port of the data, but reading from the obd come out on the other

  6. #6
    Banned
    Date Of Registration
    Sep 2012
    The resort
    Piemont
    Messages
    432
    have you tried to ask the owner of the file ori?

  7. #7
    BEGINNER
    Date Of Registration
    Sep 2012
    Messages
    52
    I asked my friend, but has nothing, and are not able to contact even the one who made the map

  8. #8
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    80
    it would be the control module nn properly encoded!!!

  9. #9
    BEGINNER
    Date Of Registration
    Sep 2012
    Messages
    52
    hello Team Electronics could you give me more clarification!!!!????

  10. #10
    THE AVERAGE USER
    Date Of Registration
    Oct 2012
    Messages
    80
    Maybe email the file in the appropriate section, namely the mod that you read and then compare it with the ori if it seems a matter of the map!!! But seeing the results that you get on the diagnosis map the account
    Last edited by Team electronics; 23-10-2012 at 18:00

Page 1 of 6 123 ... LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •