Recognition map

[garrett92]

hi to all,

I am creating a setting file very detailed where I found all the maps and assigned its name, I'm just missing this, I would like to understand that the map we speak..

thank you all in advance

I enclose a screen and ori

[cinqueturbo]

The image and small..
write the address of the maps you first..
one observation and question I have to ask for it but use MAP3D for choice or other??

[garrett92]

With map 3D, I can add any map outside of the driver, and give you the chance to change it both in table and in 2D knowing the load/rpm unlike ecm 1.61 that doesn't let you record new maps out drivers around here.

Tonight as I have time, I put the addresses, this map in question found in auto the damos but I do not understand how to act on this map

[cinqueturbo]

With map 3D, I can add any map outside of the driver, and give you the chance to change it both in table and in 2D knowing the load/rpm unlike ecm 1.61 that doesn't let you record new maps out drivers around here.

Tonight as I have time, I put the addresses, this map in question found in auto the damos but I do not understand how to act on this map

OK..
but I would opt for winols that has more controls over all of the damos a2l, also, you can save your project with all the 3D maps and 2D tables, etc, etc,

[cinqueturbo]

These are The Maps That Interest you?
4DBF6
4DD96
4DF36
6DBF6
6DD98
6DF36

[garrett92]

On some of the TDI, in particular the systems to pump VP44 and those injector-pump-PDE, it is necessary to change
this is a map that defines the motor load as a function of the intake air. This map recognizes
easily by the presence of zeros in the areas of the cut-off. L ’increase according to the cases, can reach
the 5 0 % : this is possible because this table is not directly linked to the dispensing of diesel fuel .
Usually the change is always made in the areas of request, maximum torque and maximum power.

this and as found in a guide on the internet, cinqueturbo I have already added all the maps advances, lim, press turbo,boost time time iniez. etc etc all the maps that the driver will not be automatic, but I don't understand what is acting and how it changed this thanks

[garrett92]

you winols is the best not doubt that from when I changed the pc and now I have windows 7 not work for me neither the old version nor the 2.24

however, this is a map specific load quantity of air from what I understand address 075224, could you tell me the function of this map thanks cinqueturbo

[cinqueturbo]

I could Load any file, but it would not help since you can not even see or download how do I?..

Pasting from the Damos move the rows and you do not understand anything..

Conversion quantity(Umrechnung Schleiferspannung in Prozent,Umrechnung Drehzahl)/mg/Hub

Map "Bosch 16" (8x9)



%
20 30 1000 2000 3000 4000 5000 6000
1min 200 0 1530 2597 3534 4494 5377 6326 6882
500 0 1255 2280 3278 4186 5043 6033 6630
800 0 996 2024 3021 3862 4733 5762 6401
900 0 919 1952 2946 3774 4654 5686 6340
1000 0 816 1844 2838 3685 4547 5607 6245
1500 0 586 1548 2520 3320 4230 5261 5939
2000 0 432 1271 2266 3052 3993 5005 5630
3000 0 269 1004 1876 2664 3579 4520 5198
4000 0 136 819 1593 2357 3234 4099 4814

but have you tried with VAG EDC15P+ Suite?