Ecm Titanium - Scala rpm is only 6000

[Khendal]

Hi guys, as I wrote in the introduction, are new... and they are new in the world of chiptuning.

I ask this question because I can't understand why I never see in the tables, values above 6000rpm. Why?

I seemed to read that this limit was for those who used the program "not official" ? Can?

[dragusdrake]

Have you worked with car drivers do not have the rpm higher at 6000 rpm. Simple

[frenk85]

I'm not an expert,but if you change the bp example to 6000 in some of the maps,the grid is changed to 6000giri.test!

[Khendal]

Oh my god, I'm trying with my machine that the original has the limiter at 6800 rpm... and yet the drivers of the ECM stops at 6000...

There is also a way to lift it? Example now I'm at 8500 rpm...I would like to understand something from the 6000 in on

[dragusdrake]

And that sense has to move the breck above the 6000? It is logical that if the driver gives you the rpm and you adjust the axis, if you reload the mod files as you update the axes, if the axes from the original arrive at 6000 there will be a reason no?

[tranky]

Since it is described that car you talk about I give you a advice..
If it was Gasoline, not to exceed beyond the threshold of 6500RPM.. If we talk about the Diesel not to go over the 5500RPM ammeno that you do not want already to change the title.. then you do!

[frenk85]

Yes, you're right! But look I've seen to turn,and still running 1.3 to 6000giri with just a turbo and injectors............
Also depends on engines!!!!

[tranky]

obviously depends on the engine.. there are motors with stock heads and plasterboard (so to speak, of course) that is just a little and you crepano, however, die hard.. for example the tested alfa 147.. from the 115 120 150 hp are specular and are very lowresistence.. while those of the 140cv are beastly!
for proper mechanical operation, the advice is always to stay a cleat below the maximum engine speed.. then of course money is yours, you do what you want!

[cinqueturbo]

Yes, you're right! But look I've seen to turn,and still running 1.3 to 6000giri with just a turbo and injectors............
Also depends on engines!!!!

Also the 6800 with the addition of some special

[frenk85]

Also the 6800 with the addition of some special

Well, in this case, the gas can only accompany!...
Too much to ask for the particular 5turbo?!?!?!