The real terror is the block of the ecu - true or false ?

[robby51039]

talking with a professional preparer as well as a mechanic friend of mine,he recommended that I own a power supply because it does not have peak voltages that are dangerous in phase
writing you have ever done?

[legendaryslave]

one stabbilizzato we would like to but I also am on the bench I have always powered by the battery (but a good one) and I never had any problems

[robby51039]

I thanks for the advice

[legendaryslave]

I thanks for the advice

anything you carry only my asperienze

[emilground]

When I write, I connect a power supply voltage, adjustable and constant 25A ( the ones used for the HF transceivers), which provides a current that is very clean. I have also written with the MPPS of a BMW 118d that is said to be very hard to type in the serial with the clones and ? all went very well. As suggested by the program, I have adjusted the voltage to 14 volts. The same power supply I use it by connecting it to the BDM ( the rest goes from 10.5 to 16 volts depending on the adjustment). Of course it must go wrong does go wrong the same, but at least we try to limit the pi? can that happen

[antonio.o]

When I write, I connect a power supply voltage, adjustable and constant 25A ( the ones used for the HF transceivers), which provides a current that is very clean. I have also written with the MPPS of a BMW 118d that is said to be very hard to type in the serial with the clones and ? all went very well. As suggested by the program, I have adjusted the voltage to 14 volts. The same power supply I use it by connecting it to the BDM ( the rest goes from 10.5 to 16 volts depending on the adjustment). Of course it must go wrong does go wrong the same, but at least we try to limit the pi? can that happen

Sorry, but the power supply you connect it in parallel to the battery of the car or what??.
Hello

[emilground]

in parallel, as if it were a battery charger. Then I turn on the ignition and adjust voltage. I also indicates how many are absorbed by the circuit to bring the desired tension.

[antonio.o]

Feel I have changed a power supply for pc c and me delivers almost 14v and a minimum of 10A say I can use it.??
Hello.

[emilground]

According to me no why? should be in protection. To keep the framework on 14 volts are required, usually from 10 to 25 A. Then the switching power supplies are very sensitive and go into protection. Once connected to the power supply ( at the beginning, I get 11.5 volts) increase slowly the voltage. However, a serious power supply does not cost that much and you can use it for so many things

[antonio.o]

You made me come to curiosity? I'm going to try it now and see what happens.