Marelli 1.3 mjtd

[Gia]

I would understand if we get it wrong or ? just read the maps to the contrary

[msport (exil77grande)]

I would understand if we get it wrong or ? just read the maps to the contrary

the answer is simple just get a machine to make a change only on the injection time and try and see if it is right or not.

[Ghizmo]

I msport and I would add that is it mandatory to monitor the diagnosis with the correct parameters at a glance

[biros]

sorry but I am new
but the story that the maps of the marelli read right to left and' right???

[sportknight]

you ? right...then I'm reporting why? after a bit of testing I managed to keep good results,low fumosit? and no problem...

what have I done ?

increase of 10 % of the time from the peak down to the tip...
increase of 15 % for the two curves in the driver's wish, and the curves of the foot pedal as a function of temperature
20% on the torque limiters
the 3% on rail and 5% on the limiter

the car goes very well

[Gia]

Smoke and turbo that say?

[legendaryslave]

you ? right...then I'm reporting why? after a bit of testing I managed to keep good results,low fumosit? and no problem...

what have I done ?

increase of 10 % of the time from the peak down to the tip...
increase of 15 % for the two curves in the driver's wish, and the curves of the foot pedal as a function of temperature
20% on the torque limiters
the 3% on rail and 5% on the limiter

the car goes very well

very well it is not a unit of measure are you sure you read contrrio, or have only the axes reversed

[sportknight]

the safety of me, would give only an expert in marelli(which up until now have not helped me ),but for what I could understand from only the maps are read from right to left..

[legendaryslave]

the safety of me, would give only an expert in marelli(which up until now have not helped me ),but for what I could understand from only the maps are read from right to left..

then, in the evening you can post a scren so we can understand better

[ducati83]

you are a gold mine....I just finished reading the whole post....and I understood a lot....now I see a file, and then maybe the place for your advice....