The transformation of the 500 Abarth 135cv *esseesse 160cv...

[fabiovts88]

I figured gianpy if I can help I do it gladly

[darioz90]

Here I am , I had been a moment absent , less evil that has already? suggerto someone ihih

[darioz90]

Ps last thing , out of the driver there are other things that change from 135 stock to a esseesse...

[fabiovts88]

sorry for the info but the kess v2 clone writes them to the ecu?

[fabiovts88]

guys, if you can affect I have the files of the 200cv trofeo abarth

[darioz90]

I would, can you post it here?

[fabiovts88]

sure here it is
could you explain to me how to see the number of increments between file ori 500-stock and ss can't with ecm I bust all

[unlocker06]

Legendary I'm doing various tests with torque limiters and I have to say that the car is fine, but as you say the crowd is ihi warms up and falls in pressure. I wanted to ask you if by ecm you know you set the launch control, I tried to set the limiter, the engine rpm threshold is lower but I lock the rpm at the set value 4500.
Could you help me

[legendaryslave]

Legendary I'm doing various tests with torque limiters and I have to say that the car is fine, but as you say the crowd is ihi warms up and falls in pressure. I wanted to ask you if by ecm you know you set the launch control, I tried to set the limiter, the engine rpm threshold is lower but I lock the rpm at the set value 4500.
Could you help me

you can do that but I see that you have no active participation in the forum, therefore even if you do file, you can not download it

[passione motori]

and already from 2013, a single message.............then, setting for the launch control, think before to a good remap, and the rest think later.............