BDM - Clarification

[panny200555]

Thanks frantik3,

Today I ? arrived at the bdm100 clone. Before working on my unit I wanted to do some testing on an ecu taken from a crashed car by(alfa 159).

The ecu ? the same that I have on my car is that? edc16c39. I have installed and using the jig and all the connections I read the ecu with the option of full backup.

I did the read only:
- 29BL (? flash? I think of you why? exporting from file (2 mb)
- Serial E2prom (what?? definition?)

But lacks the reading of the "MPC5XX Flash" (? micro true?) how ever it is not reading from the micro? what is the reading of the micro-cio? ? optional?
thanks

[legendaryslave]

Thanks frantik3,

Today I ? arrived at the bdm100 clone. Before working on my unit I wanted to do some testing on an ecu taken from a crashed car by(alfa 159).

The ecu ? the same that I have on my car is that? edc16c39. I have installed and using the jig and all the connections I read the ecu with the option of full backup.

I did the read only:
- 29BL (? flash? I think of you why? exporting from file (2 mb)
- Serial E2prom (what?? definition?)

But lacks the reading of the "MPC5XX Flash" (? micro true?) how ever it is not reading from the micro? what is the reading of the micro-cio? ? optional?
thanks

in these units, the micro contains the bl and then did you read it ? the complete reading of the bl

[panny200555]

when you read and write files, and in case we can help you rebuild it

hello,

I read full backup with Bdm.
I noticed that bdm does not know automatically the family ecu and it gave me this warning:

Attention: family ECU unknown
Select a compatible family
Contact technical support

then he asked me to choose the family and I have chosen "Bosch EDC16+C39 GM DAEWOO" (I repeat my self ? Chevrolet Cruze 2.0 150 hp with ecu EDC16c39)
then I read the file from 487kb. (annex).

Note: before you read my ecu, I did a test on another same unit of an alfa 159 (edc16c39) and of this I identified the family automatically.

The other strange thing ? after reading the file (when it asks you to fill in the info, brand, model etc) I did see a number of hw and sw right.
me :
ECU HW: 1037500646
ECU SW: 1037500646

Instead of the real one should be:
0281015445/ 96983951

However, as required before you can for courtesy, but to make up this flash so I to the proper location.
Here is the file that is read with BDM(corrupt flash), and the file Ori 2mb read with mpps.
Thank you for the help that you are giving me.

hello

[panny200555]

So the file that I read that ? only 469 kb ? the full backup? With this I can clone the ecu??

[nuovaecu]

guys a piece of information from those who are more experienced than me if I would like to write a unit mtj launches in bdm and rewrite it with the backup point mtj and possible? in practice, I can transform a lancia ecu ecu grandpunto both mtj??

[legendaryslave]

give me a pleasure scompattami the read file in the bdm open it with the soft and I export the bl+e2p

[panny200555]

Hello

here is the unpacked files.

Thanks

[sportknight]

scuate,but the bdm can only do the edc16?

[legendaryslave]

that plant that you have made the file that you posted does not ? even ori here you go the file rebuilt and fixed by write bdm bettini and place in motion

[panny200555]

THANKS legendaryslave!!

You're right.. it was not real gold, as I don't have gold why? the machine ? been mapped, and the preparer has not given me the file ori.

however, with another friend, we had a clean file that is read by my drive to build ori. But didn't I give you what why? I felt so safe if it has been rebuilt well. For knowledge the attached, can you give us a look if ? been redone as well and if we can consider it my file ori?


However, I can't download your file, why? I don't have privileges ... you can load it from somewhere else?

thanks