ugo nothing to make you not want to know this marelli damn
ugo nothing to make you not want to know this marelli damn
you have to feed the 23/50 +12V...then if I'm not mistaken the e xxx goes to the contrary. Beware of burning the ECU, as you see that you will find all of the material in the folder of the rooster.....(calm )I the first unit that I did was just a Marelli at the counter made me throw away the sweat to read it to the end, we succeeded? the problem was in the flat cable that was broken fixed the whole cable as smooth as oil....
How do I see if the flat cable ? short-circuited or interrupted? the 12 volt switch, in fact, the unit becomes warm, but not always the same error...beginning to think about the rooster who doesn't ? good...the only thing left for me ? see if the flat cable passes current, or solder the pin strip on the pitches at least I'm sure that makes contact...my next purchase will be? the ktag is much more reliableOriginally Written by max75
I have tried everything I do not want to know that damn really...I measured with the multimeter if c ? the right voltage in the wires of certain feed and others no but anyway ? always very low voltage even if the program cock writes to me that the voltage is 13 volts...if it burns that I'm interested in the intake from a friend used, in fact, I would not like the ecu ? burned or stuck...by the flat cables, the voltage comes out adjust...sooner or later we bring it off?!IMG_0346.jpg
now the shedino ? put good, at this point, if you are sure you contact on pitches you have to try with another ecu, I would not be the instrument.
ugo ---- president A.E.P.
hello I am attaching a photo if you can? serve 20140924_123600.jpg
ugo, you can't figure that out, I did the test and from the wires did not come out the 12 time I changed the wires and I saw that the 12 volts comes out perfectly...? normal that he did not read the will arrive, or no 2 volts... beautiful chinese products, I must thank those who me sold...now that I've figured out the problem and solved I have read I will have you know
mulla doesn't want to be read that damn
IMG_0347.jpg
here are all the links to make the same mistake
if you put some information in the pi? ? better, type of hw and sw in the ecu
Write permission
Quote