study the map touareg 3.0 tdi edc16cp34 0281013686 1039s20440

[lsdlsd88]

1) as the first and second block I mean that the maps are in 2 "groups" separated.
the first group goes from about 188xxx to 1A4xxx , the second (which I think is the only one that you need) goes from 1C1xxx to 1FCxxx.
normally use the first or the second depending on whether the car is manual or automatic. some I see make them all and 2 so just to be safe, I prefer to do 2 tests and to understand what is actually using.

2) the axis of the prex rail goes up to 65 but do not worry about it because even if you inject more than 65 always use the value in the last column. for that you need to do you do not need to adjust anything

[joker01]

ok I understand....
mine is an automatic transmission, however,....

[joker01]

if I want to actually see how inject my injector, I have to look at the map the time is right...
we set up a talk a little wider....
I have now made a log with original file and max iq 62mg to 1200mg\air around. are 19.3 of afr.
already that there are I wanted to do a study to maybe 16/17 of afr......
this ecm calls for the "injection, split," I can't understand that map either...
x:??
yrex rail
z:???

[joker01]

I started a smiley face......
y: prex rail

[lsdlsd88]

the photo is tiny, but by eye I would say the duration of injection

before touching too many things load a simple map as you said only raising the lim couple, and see from the log what happens..

[joker01]

Tomorrow I want to put photos....
If it was duration to the x-axis what I have???
The only thing that me back from trying again and again to load the maps is that I write in bdm and each time I have to remove the ecu and open it....for this I wanted to make a speech to see to do some calculation and maybe give him the 10 mg of diesel immediately.....
However, I accept the council and I load this step and do the log....

[lsdlsd88]

I usually do it in the obd without any problems with kess

[joker01]

I have kess,I have mpps and cock, but not official, as you can imagine....
Then it seems to me this ecu has a counter of the scriptures by obd and after tot.num lock.
But all info is taken here and the......

[franco75]

I don't really understand how you moddato the maps of the torque limitation of the gear.
from 1d438a you have the limiters lambda

[joker01]

I don't really understand how you moddato the maps of the torque limitation of the gear.
from 1d438a you have the limiters lambda