review detailed bmw 120d 163cv

[perrysound70]

I enclose a map made with the ecm

[perrysound70]

file.mod zipped

[enrico pontoni]

file.mod zipped

ok, then your limiter is already set to the 2700 mbar, then they would not have big problems, but you've changed the maps wrong in the wrong way. Not work percentage....make a couple of calculations....there is a section dedicated to the edc16 where you can learn a lot also I suggest you don't take seriously the ecm would otherwise not go anywhere. If you have the turbine mod you need to do a serious work between management, vgt and management pressures, it is not so simple you need to know how much fuel to inject, where, how and why....then you make a fast car

[perrysound70]

for winols are 4 hours only today that I try but nothing

[perrysound70]

I would like to know because I'm not going over 1.5 bar

[perrysound70]

I continue to study,maybe I have some problem that I do not understand where the actuator always opens at 1.5 bar

[enrico pontoni]

I continue to study,maybe I have some problem that I do not understand where the actuator always opens at 1.5 bar

the problem is only in the map, believe me...it is not done properly if you write on the section dedicated to the edc16 likely help you

[perrysound70]

no,I do not sleep.I managed to start something with winols but the damos bmw that I have I seem to be in tedescodigermania!
But now piso download!
For casoperfavoreperpiacere you have the damos bmw in English?

[enrico pontoni]

no,I do not sleep.I managed to start something with winols but the damos bmw that I have I seem to be in tedescodigermania!
But now piso download!
For casoperfavoreperpiacere you have the damos bmw in English?

eh unfortunately no however, you will find the maps of the turbo under the folder _pcr are 6 maps in a row 16*16 memory

[perrysound70]

it was an error of the Torque that does not read most of 1.55 bar,I mounted the pressure gauge, the old with the tube, and now the crowd goes up to 2 bar! thanks for the help!!!!