KESS V2 MY works 100%

[ake85]

nox, therefore, you need a diode 1n4148 look at the photo that he posted ecuprom you have to solder in the pins marked with red dots..not mistake the polarity .with regard to the protocols unfortunately ? a problem of the fw... we don't have the updated one

Hello can I know the right size because I find of various voltage and amperage thanks for the reply

[ugoboss]

Hello can I know the right size because I find of various voltage and amperage thanks for the reply

go by a qualified electrician repairs the tv and things like that and you say give me a diode 1N4148 and he will give you as many as you want without asking it the voltage it amperage.

[ecuprom]

oakley1, has tested the change?

[oakley1]

the black dash that I designed on the diode matches the indent of the bill... the amendment does not implement the protocols, but it goes to obviate l is impossible not to read the edc15

[nox]

I have on hand a kess and also the k tag a friend, the two of 1.89 xo on the ktag protocols are all enabled, while when I connect the kess protocols trucks vanish except someone to Renault , then as I understand, however, the change will improve? however, the operation ? The polarit? and that of the red arrow? Thank you very much

[ecuprom]

S?, I EDC15 test and it works.
ATTENTION: THIS IS NOT 'ACTIVE PROTOCOLS GRAY.
This modification ? to communicate the K-line, line and stabilize the canbus

[oakley1]

not yet, for now, I have not edc15 to try....you ecu have you tested?

[ecuprom]

If you put the diode as in the picture, that ? the polarit?.
You ? tried with EDC15?

[ecuprom]

I put the link video recording EDC15C2 PSA.

https://www.dropbox*****/s/kcxqqfbcw3...20PSA.MOV?dl=0

[sno74]

Yes I saw but written in the Bench, however, not connected to the car right........