Page 41 of 55 PrimaBefore ... 31394041424351 ... LastUltima
Results from 401 to 410 of 541

Discussion: EDC16C - impariamola!

  1. #401
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    The resort
    prov pescara
    Messages
    392
    small update, momentarily pulling the sensor Water as announced previously, the minimum becomes perfectly smooth, also reflected that disappears the preinezione now who can give a hand?? idem cold after a while, the game enters the preinezione that sfalza the minimum
    The power is nothing without control

  2. #402
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    The resort
    prov pescara
    Messages
    392
    Guys but 1 can advance to the intermediate arrangement?? From 1500 to about 3000 for iq 50 and 60 mm3, and of course, to come down, and 0.2 to 25 mm3 can create problems? ?
    The power is nothing without control

  3. #403
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    Citazione Originally Written by jovandj Visualizza Messaggio
    Guys but 1 can advance to the intermediate arrangement?? From 1500 to about 3000 for iq 50 and 60 mm3, and of course, to come down, and 0.2 to 25 mm3 can create problems? ?
    No does not create any problem, if you calcolassi good to see that you can give even more? in some points.
    For the fact that the minimum of dancing eye to change bits of the minimum, as it seems to me to be enough of those who govern it, the more that the other, there are many bug fixes and various things related to the minimum.
    If you want you can lower the pre injections if you think you may be causing the irregularity?, removing the car to smoke? white from the cold then try lowering them with a small step, or without touching the pre you can change the corrections of the latter, depending on the temperature.

  4. #404
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    I have a question about the 2.0 mjet 2 always with edc16c39. There should be one or more? limiters according to the egt detected by the sensor present on the fap. I found a couple of maps with bp that can be temperature of the dpf, these in the z-axis have a value of 8192, which after 500 degrees begins to come down, and sscaletta. The strange thing ? I also limit before 500 degrees on my giulietta, I and lambda-1.13 (only on the first 2 maps, lambda?, those not 'during the regeneration') so I'm at about 16.5 Afr, and with 1212mg of air at 4000 rpm I only 77mm3 which gives me an afr of over 18. All the limiters are 90mm3.
    Someone ? knowledge of these other limiters according to the egt, or other limiters that begin to limit, especially over the 3500?

  5. #405
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    The resort
    prov pescara
    Messages
    392
    I understand it seems to me that by removing that degree of postponement by 7.5, and 10 I have gold in my 750 and 1000 rpm seems to go better, even the least if the map would you give him a look? ?
    The power is nothing without control

  6. #406
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    As soon as I can I look at it now from a pc, without titanium.
    Low rpm anyway ? quite delayed, especially to reduce the nox so don't make too many problems to give 1.5 degrees in the area with low iq. Around for over 6 months with advances made everywhere, and the only difference ? a greater reattivit? and lower consumption.

  7. #407
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    The resort
    prov pescara
    Messages
    392
    Type already 20mm3 for example??
    The power is nothing without control

  8. #408
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    Citazione Originally Written by jovandj Visualizza Messaggio
    Type already 20mm3 for example??
    Watch my are redone everywhere, and everywhere I say really anywhere. But they would put up a case, even if up to when you're on increases in the netherlands do not have problems. After 3000 rpm, not raise them with low iq, but if you want you can lower it a little at high rpm and remove a bit of the engine brake.

  9. #409
    THE AVERAGE USER
    Date Of Registration
    Mar 2013
    The resort
    prov pescara
    Messages
    392
    Really precious with your tips are great now I have to redo a couple of calculations, and a draft and I'll make you see
    The power is nothing without control

  10. #410
    THE AVERAGE USER
    Date Of Registration
    Feb 2013
    Messages
    216
    Citazione Originally Written by jovandj Visualizza Messaggio
    Really precious with your tips are great now I have to redo a couple of calculations, and a draft and I'll make you see
    Everything I say ? on my experiences in a year and most of the tests on my machine. Then maybe I'm wrong, but for now what I have studied ? always been correct.
    If someone were to give his opinion would be interesting to?.

Page 41 of 55 PrimaBefore ... 31394041424351 ... LastUltima

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •