In the workshop where I work we always use this task before upload a eprom changed
In the workshop where I work we always use this task before upload a eprom changed
Ps During the process of writing the ECU loses communication with the remaining Management electronic that acquire this as an error; ABS, Steering Column, Bodi, etc., etc., then before you deliver the car we cleaned up..
goes for many of the Houses and the Cars,
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Sisi sometimes also loses the encoding injectors! Regarding the reset, it asks me to start the engineOriginally Written by cinqueturbo
I know that you speak of regeneration..
only in that case want the engine on and the temperature of the esecizio of the engine
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
The ninth of the replacement.tells me ignition the engine turned off after that tells me to pass the engine
I don't know it varies from instrument to instrument, perhaps...
have you tried to force the operation even without starting the engine?
otherwise try with another tool if celai..
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
sorry but that diagnosis are you using ? x reset the paramertri should not be set in motion , only the x, a forced regeneration asks you l start !
With 2 other diagnosis same thing. Instead, for the replacement of the pressure sensor makes me do it safely
Guys good evening, however, the fact the luca stanca the machine has emptied a lot with the map made
Eeee? never happened even with only FAP illustrated with map.. you must understand that the map was made maybe one with + Set or Pacifiers :P
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Write permission
Quote
