switch the maf off and map on edc15p

[munro]

you already written in another post....if you swicciato lim fumes from maf to map, you are not allowed calcolarti the afr exact....
the variables related to temperature ,pressure ,density of air etc. are so various, that ? impossible to calculate an AFR as you f? with the lim fumes maf based..
when making this mod, in fact the car tend to smoke slightly more, because, precisely, the calibration air, diesel does not ? cos? accurate as with the lim fumes maf active....

[maik_93]

and then how do I edit the various map 1 2 and the boost rpm?

[maik_93]

for 75mg of diesel

[maik_93]

after several tests and increments are not satisfactory, I found the differences between the map of the 130hp and the 150hp...after the map an overboost there are fixed values...of straight lines that have as the value of 3631 in the 130hp and 2731 in the 150hp...I have noticed that decreasing this value, the machine smokes a little more? which maps are they?

[marco_evolution]

hi folks, Munro I wanted to ask one thing in particular,or do you ? never happened that in some of the car(with electronics edc15p) the switch maf wrong? And you can give an explanation..To the end so rude the always off but I would like to understand the why? not to be... as in others in which magimente it works ok

[maik_93]

post your file