mini cooper s 2002 volumetric with processing

[gfr]

an advice from a friend and pulley and you, filter , exhaust, and you have , right map, and I repeat giusa and.........have fun!!

[minijuri]

ok, but on the right map we have to?, to you it seems normal that the tablet the butterfly valve does not open completely, but to 91.4 %?? something that should not be c'

[minijuri]

for the aquamist, I thought, and it was a great ? a good idea , but you need an ecu that supports two mappings, so that if it ends up not traveling with a map, push that way

[frantik3]

where do you see on the map that the butterfly opens so? even why? their management butterfly I don't think I have touched

[minijuri]

but seeing the maps are compared, we see that the map something increases... let's say, 10% more on all the map....

[frantik3]

precisely, if you don't know what and you can not say that, and the second one I have touched 2-3 things and also bad, and no criteria have been working badly, and when in its region han known nothing

[minijuri]

mmm I understand I understand....

[jolidj]

if the machine is nn nn nn the fault of the 9% of the butterfly that opens nn . and the all-together.
it touches . lim torque advances in and try it.
but if you you don't even know how to touch the advances and how many degrees you touch them then you need to be put to study and find a compromise for your machine.

[gfr]

bo I gave it a okio and I also agree that they have touched 3-4 cosette and the pedal does not open so! I assure you

[buio service]

hello to all. I was on my own I had the pulley -17. then in the dealership I did load the map works, and a friend gave him a remodeled. because the works will also change the injectors and the camshaft. then hosmontato l intercooler and I trapped in two aluminium plates with two tubes connected to a water pump with a small tank.