they are sincere, I can not explain well, but you can do some tests if you want to learn very simple..increments the map, and after checks for the value in diagnosis and see that voltage, but be careful that you can scrub to the minimum value and full reggime the value can always change...anyway, everything is based on the pwm value from them, you can calculate everything based on the pwm value that changes....Originally Written by dvdtuning
Thanks for the reply, but I have to change both of the memories? you do not have one socket?
if you're lucky, the year the socket if it already has been touched if I and a model more recently, where it was noticed that these sockets are not used much because it is destroyed immediately, and the ecu is burned to the false contacts...anyway you need to read ? import them both, but in the right direction... before ll then hh I vice versa...
and anyway, even if there are clogs, I suggest you to them and solder them directly on the pcb without socket...
no, especially because it was for a speech adapter for willem, for now I don't have, I only have the GQ-4X, no-frills, enough for me or do I have to provide some addition?
For the eprom, I confirm that I have to change them both? this?: I did not understand very well what I expect, type 2 file 1 contains maps and 1 the remaining part, or the same file repeated on both the eeprom?
yes I think that with this programmer you can read it, only that you need the adapter for these type of flash memory...about the files in a ec a part of the map,and in the other ec that the remaining...
I understand, thank you for the info!
I have read and written with the galep...
ok, even my should do without adapters
Last edited by msport (exil77grande); 12-03-2013 at 23:32
Write permission
Quote