That limiter and conditions vehicle-rpm=lim iq in mm3 if I'm not mistaken the e4 and 77mm3 so if you have 100mm3 should be a edc16c8 however, indicates that the limitation and 100mm3 for the first 3 steps in terms of rpm
That limiter and conditions vehicle-rpm=lim iq in mm3 if I'm not mistaken the e4 and 77mm3 so if you have 100mm3 should be a edc16c8 however, indicates that the limitation and 100mm3 for the first 3 steps in terms of rpm
The power is nothing without control
But then you have to unlock them on all the curves (my goal 80mm3) or just the ones related to the medium and high revs?Originally Written by jovandj
Guys but copy the lambda of 1.9 140cv edc16c8 that and a little more forgiving of the edc16c39 on the 39 fact can create some damage? ?
The power is nothing without control
Just redo your as you want
In that sense, sorry? ?
The power is nothing without control
If you want the lambda you can also put all in 1, all set to 0.8, the whole of 1.1. Depends on how much you want to limit and how much you want to smoke..
You could raise all the limiters diesel and map the pedal so much, and then the limits only of the lambda to how and where you want. Just get 2 calculations with a log and decide how much to inject each of the various engine rpm.
You say that it's okay to give in the whole tableIf you want the lambda you can also put all in 1, all set to 0.8, the whole of 1.1. Depends on how much you want to limit and how much you want to smoke..
You could raise all the limiters diesel and map the pedal so much, and then the limits only of the lambda to how and where you want. Just get 2 calculations with a log and decide how much to inject each of the various engine rpm.
The same value? Why? in the ori ? we say a scalar depending on the conditions.
No I agree I don't want to create a locomotive, coal pero seeing that the euro3 has a map fumes more permissive, I was wondering if it was possible to copy and paste it to see if it improved something, but without doing damage, I have already copied to other maps of the ducati corse to have a thing almost official and I have to say that as fuel consumption and improved performance as well as
The power is nothing without control
You can also set the same value if you want. Definitely the most? the lower the lambda pi? allow to inject diesel fuel, so it is up to you to decide how much and where to put it down.
Sorry but you what car do you have? Mica, you can copy maps from other cars cos? in the case just because? pi? recent. Do you know that Ducati corse has injectors that are different from yours? You know that's not you can then copy those times of injection and the related advances? I will not recommend to copy maps from other cars, facts, and you'll see that you can do much better.
Sorry wait not that they are ill-equipped I c I a gt 150 hp euro 4 2007 removed the egr and dpf swirl I copied what you can copy the ducati corse I know that has the injectors, and then vary the advance and tinj
The power is nothing without control
Write permission
Quote
