Map Alfa 147 1.9 JTDm 120 hp

[mikyrace82]

not ? maybe change the calibration of the pressadisco?

[msport (exil77grande)]

Guys mica has anyone read the title of the discussion?

[frantik3]

wrong. the value of 1000 corresponds to the stoichiometric ratio, then 14.7/1

Do you team 0,500 no I understood what you want to say and how to do it ?

[SandroMarciano]

if you mean the one that ? written to the post n?103 mario means to set all of the torque limiter *500Nm from the first bit to the last.

[frantik3]

I am referring to the post of the lambda

[SandroMarciano]

sorry, I've quoted this phrase "wrong. the value 1000 corresponds to the stoichiometric ratio, and then 14.7/1" and then speak to me of the value 0.5... 32 pages and 315 post not ? bad if I write the exact number you are referring to...

[frantik3]

page 7 the first post

[SandroMarciano]

then...I'll explain one thing at a time..the maps lambda is nothing more than the afr...indicate the relationship "air", that is, the air-fuel...it's just that the multiplication factor ? 0.001...example, if you find 1,38 means that you'll have a relationship stechio limited to 13.8....so, if you want to go down with the stechio and increase in the diesel fuel injected you have to DECREASE the lambda maps....for example, if you are able to team a 0.500, practically give the ecu to inject for a afr of 5...
for the advances in the speech ? right...considers that it would be good to stay within the 7 degrees of post inj, but within the 10 ? acceptable...

here, mario wanted to say that if for absurd to set up all the lambda-500 points would you have an A/F ratio of 14.5 x 0.5 = 7.25 (other than 5 as he writes)

[frantik3]

here, mario wanted to say that if for absurd to set up all the lambda-500 points would you have an A/F ratio of 14.5 x 0.5 = 7.25 (other than 5 as he writes)

ok thanks a lot

[Blackhawk]

has anyone done experiments with other types of injectors?