Page 3 of 3 PrimaBefore 123
Results from 21 to 29 of 29
  1. #21
    THE AVERAGE USER
    Date Of Registration
    Dec 2015
    Messages
    155
    Because if I mount the bosch in place of metatron must be programmed in the ecu?
    I made a diagnosis with multiecuscan and schedules, you can only do the reset parameters autoadattativi!

  2. #22
    THE AVERAGE USER
    Date Of Registration
    Dec 2015
    Messages
    155
    Friends I got the injectors, now I just miss the filter(we hope that in the warehouse there is)the one on the gearbox elettrvalvola,I saw that is positioned below and behind the gearbox is contained in a bolt with a hex key, right?
    Not tried to remove because there is a need to close the tanks of the methane gas, drain the system by setting in motion the drive and to finish off the methane before work.

  3. #23
    BEGINNER
    Date Of Registration
    Feb 2016
    Messages
    26
    I hope for you it is the injectors, I have customers with 300,000 miles but the injectors cng never changed.if the filaments you see them in the diagnosis ,monitoring rail pressure with the vehicle stationary, for a few hours, the pressure should remain around the 6/7 bar.

  4. #24
    THE AVERAGE USER
    Date Of Registration
    Dec 2015
    Messages
    155
    Andri just yesterday I resolved I replaced the 4 injectors and filter the methane gas and the car turns as if it were new!The customer brings me the car where I reconfirmed that a few months ago it went into the garage, where they removed the injectors to clean them,after you have done this work, the car went well for about a month!?!
    When I removed the injectors for replacement, I noticed that the cars were never disassembled the injectors,then this lord how did he clean them???I think that only took around!
    I heard on other topics that someone to try to clean it injects it with some product in the tube of the injection of methane, do you know something?

  5. #25
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    The resort
    Pescara Abruzzo
    Messages
    239
    I am in the same condition.
    the panda is my though.
    1.2 Np with 200000 km (two hundred thousand)
    I will clean or change them?

  6. #26
    THE AVERAGE USER
    Date Of Registration
    Dec 2015
    Messages
    155
    If they are plastic you can try to clean but if they are iron I think they will not last long!!!

  7. #27
    THE AVERAGE USER
    Date Of Registration
    Nov 2012
    The resort
    Pescara Abruzzo
    Messages
    239
    Some good site where to buy them at a good price?
    the car has 200 thousand miles and I think I took it off within a year, so it's good something cheap.

    thanks in advance

  8. #28
    THE AVERAGE USER
    Date Of Registration
    Dec 2015
    Messages
    155
    I bought those bosch do a search on ****** and you come out the various prices

  9. #29
    THE AVERAGE USER
    Date Of Registration
    Aug 2015
    The resort
    Salerno
    Messages
    121
    once it happened to me the same problem
    he was the distributor of compressed natural gas with cng is not so outstanding

Page 3 of 3 PrimaBefore 123

Tags for This Discussion

Write permission

  • You you can not post new threads
  • You you can not send answers
  • You you can not send attachments
  • You you can not edit your posts
  •