golf plus 1.9tdi 105hp review, egr

[msport (exil77grande)]

cos? ? wrong according to me, ? right as you posted in the previous post.
among other things, yesterday I run the same mod to close the egr on a golf 6 140cv with edc17

you for that ok pero I don't remember if I have done so on a particular machine, or if you like the guide and I'm making confusion.

[msport (exil77grande)]

but guys if you do as in the screen of the guide, and then select the check box, + / - do you see a difference of 100 points in almost all of the map because if the control should be set at 0?
I did as the guide or to a particular machine or to this observation I made as explained just above, but at this point, the beginning for a moment at bosco I don't know if there is a difference you should try in the diagnosis of both methods.

[cawadany]

Then, I've tested it as a guide on a Leon 2.0 TDI 140 EDC16, and diagnosis of the EGR remained fixed at 96.4%. I remember that you Msport said to me that you had just had the opportunity to do the work on a Golf V 2.0 TDI and diagnosis of the EGR you remained fixed at 97%. Then I don't know if you had used your method, or that of the guide.

[msport (exil77grande)]

Then, I've tested it as a guide on a Leon 2.0 TDI 140 EDC16, and diagnosis of the EGR remained fixed at 96.4%. I remember that you Msport said to me that you had just had the opportunity to do the work on a Golf V 2.0 TDI and diagnosis of the EGR you remained fixed at 97%. Then I don't know if you had used your method, or that of the guide.

perfect not even remember me which method I used, but if you try for a moment with the system that I mentioned, what difference do you find in the diagnosis?
you can check?

[cawadany]

perfect not even remember me which method I used, but if you try for a moment with the system that I mentioned, what difference do you find in the diagnosis?
you can check?

Unfortunately I have no way to verify....

[ago27]

hi guys, I appreciate all your interest, I have followed the specifications explained by our common friend msport and I hope I have done the work in the mado right, I am attaching the file (hopefully good)

[cawadany]

We are not there. You have to select the range of addresses that you said msport and bring the value to the minimum, press m (lowercase). Maybe I'm wrong, but you hold the M (upper case).

[ago27]

now, I made it exactly as described by our friend msport, let's see how and gone

[ago27]

guys what about the last post. and the choir so tomorrow the load

[cawadany]

so guys we do not make confusion,the first example as already said it was fine the first control and the second was almost perfect, but it was not ok,in this last example, however, I saw that the first control is ok, and the second you put gold, but it remained a small mod on then forgive ori the second control then check the box to your right, next to 8bit where it says +/- at this point all of the maps you move to the destination screen, and the control becomes visible as the first, and select from 0D5346 to 0D535E exactly to these addresses at this point, just re-check the box that you previously selected +/- and all the maps you rispostano low as at the beginning,you can now select m tiny and the control is perfectly clear, in fact, if you re-select the check-box +/- see the control perfectly clear as the first,I hope I could explain in case the test and places, or if you have other questions to ask,good job.

However, I think you were wrong to indicate the addresses. By selecting the +/- the maps are brought to the centre, and if we want to reset the second one as the first one I need to bring to zero by 0D5344 to 0D5360. Or am I wrong?

egr off +-.jpg