the switch-off dpf

[obd75]

the table DTC report to ori ? the one posted by Jared_poe, the blue part.
The thing that I did not understand I instead ? if making the switch is off, the dell set up and working the file with time or the other and re-enabling the dtc area .
The file ? ok, without any error of probes or other sensors ?

I think that if really any probe does not work and the DTC are .or the error is detected.

[michele30]

And then the switch off. I thought that changing the arrangement eg no dpf was turned off everything relating to the dpf, instead of not ? so, ? just that if you take a diagnosis you don't see ir? that ? with the dpf's all here.
On the vw group, it seems to me that you only switch off to turn off the fap , is it wrong ?

[andrew64]

hi from what I have learned facendoil file with vol..and reactivating the dtc for edc16c39 should work !!!
you might take a look at the file and if the table dtc ? was restored correctly

[michele30]

Hello dtcs are active , but you have not made the switch off ?
For me, so you will sure light is turned on, and errors in the dpf.

[andrew64]

instead of 01 or 02 I find ff
would you give him a look too?

[andrew64]

the off switch on this file I do not find, or that I have not been able to find it
if gentilmenti enlighten me ?

[michele30]

for me, your switch off ? to 1EE816 in 8-bit as in the other maps ? them I guess but you have to test if it works.
Or wait for someone who maybe has already done.

[andrew64]

someone who knows could give us a straight

[andrew64]

however, just for the record the same file processed with time, there are approximately 700 km walking without any problem before processing it, I reset the counters of clogging the dpf and up to the present are zero

[Errecinque]

I, however, I can confirm that the dpf switch on edc16c39 (alfa romeo 159 2.4) works well, also bringing the bits clogging the val max. It only takes 2-bit, without process or work on the dtc Lambda and the dpf .
On my are
1de432
0 no dpf no probe
1 dfp will probe
2 no dpf will probe
look 8-bit

1e46ee bit clogging of the dpf