Big Problem C2 VTR Siemens SID 806

[Macchinista]

I did a test. I've written in the boot mode the file ori and then I reread it immediately after, and compared conil file golds that I had previously read when everything still worked, and they are different. Start the same then at a certain point one just written it all goes to zero almost at the end of the map. How ever this thing? I attach the 2 files to cos? you understand better...

The original (when it was working): http://www.professionalchiptuning.ne...ll=1#post85925

Original Written and re-read in the Boot: Written and read in boot C2 1.4 VTR 68Cv Simens HDI SID 806 880 - 280.zip

[legendaryslave]

I did a test. I've written in the boot mode the file ori and then I reread it immediately after, and compared conil file golds that I had previously read when everything still worked, and they are different. Start the same then at a certain point one just written it all goes to zero almost at the end of the map. How ever this thing? I attach the 2 files to cos? you understand better...

The original (when it was working): http://www.professionalchiptuning.ne...ll=1#post85925

Original Written and re-read in the Boot: Written and read in boot C2 1.4 VTR 68Cv Simens HDI SID 806 880 - 280.zip

I'm at the point from tests made changes tool

[Macchinista]

I have just done another test, and I realized that the rewrites right, only if you encode it before you write it. Cos? doing, when I went to reread it, it was already? scodificato (probably from gallo) and the two files were the same this time, but the machine is not part equally. Now I still try this method with various files immo off and rolling code reset and see if it cable something.

[Macchinista]

None do that I give up. As a gi? told previously by the user SandroMarciano and also from the service file of the forum (that rigrazio for the availability, as always, even on Sunday), the only solution will be? begun pulling it in Citroen and hope to be able to get them some official update that put in motion. You held? updated on the developments!

[SandroMarciano]

yes, I also tried it with all the systems to eliminate rolling code, but none worked... The problem for you ? derived from the fact that you have rewritten a file that was not pi? what the machine was expecting... you were supposed to read the file again after the attempt to go in the bike failed and restore the original one... unfortunately the rolling code and each attempt to power-on checks the code when you start and change it according to an algorithm... if you do not find what you expect does not even turn the starter motor... in my rel? to pi? can't I just... at the end we did not give up, and I have sworn not to do ir? siemens for a long time...

[Macchinista]

Then, I did some more testing this evening before giving up altogether!!! They are stubborn!!! I have rewritten my gold and nothing to do. Then I recovered a file ori in the network with the same HW and SW, and guess what?? And' resurrected!!! I can't believe it...

Thanks to all for the help and for the patience. You can not imagine the satisfaction to feel the car starting. This is for me ? a passion\work and even if sometimes there are these moments no when all rifunziona ? really satisfying!!

Now it remains to understand... the reason For which, with its ori not want to know and that's how I found you? Among other things, the ECM its ori me in the riconoscevva even, while the one I downloaded immediately find the driver automatically. Sar? been corrupted, the golds that I had read?

However, be that as it may for a while I don't want any more? to see this Siemens...

[ugoboss]

Then, I did some more testing this evening before giving up altogether!!! They are stubborn!!! I have rewritten my gold and nothing to do. Then I recovered a file ori in the network with the same HW and SW, and guess what?? And' resurrected!!! I can't believe it...

Thanks to all for the help and for the patience. You can not imagine the satisfaction to feel the car starting. This is for me ? a passion\work and even if sometimes there are these moments no when all rifunziona ? really satisfying!!

Now it remains to understand... the reason For which, with its ori not want to know and that's how I found you? Among other things, the ECM its ori me in the riconoscevva even, while the one I downloaded immediately find the driver automatically. Sar? been corrupted, the golds that I had read?

However, be that as it may for a while I don't want any more? to see this Siemens...

you contrrollato the differences between the two files, to limit post that we look at them to see the problem where'.

[Macchinista]

you contrrollato the differences between the two files, to limit post that we look at them to see the problem where'.

Sorry for the absence, however, the car ? divided after writing this file ori via OBD: C2 1.4 HDI 68 Hp Siemens SID 806 280_880.zip

Comparing it with the one that you can? find at the beginning of this discussion, we see that they start the same and at a certain point the bed from me, it all goes to zero while this continues, there will be curves, and then return to be the same. Among other things, the part that is missing ? a part where there are maps important. This is also the reason I think that ecm is not I recognized the driver.

My question now ?: by modifying this file, and riscrivendolo the machine partir? or not? I'm tempted to try...

[ugoboss]

Sorry for the absence, however, the car ? divided after writing this file ori via OBD: C2 1.4 HDI 68 Hp Siemens SID 806 280_880.zip

Comparing it with the one that you can? find at the beginning of this discussion, we see that they start the same and at a certain point the bed from me, it all goes to zero while this continues, there will be curves, and then return to be the same. Among other things, the part that is missing ? a part where there are maps important. This is also the reason I think that ecm is not I recognized the driver.

My question now ?: by modifying this file, and riscrivendolo the machine partir? or not? I'm tempted to try...

I rileggerei the map in the ecu, and if it is equal to what you have written will that and go ahead with the changes.

[legendaryslave]

Very probably a wrong reading of the file ori initially