The values of the mass air flow sensor in the engine section of the channel 10.Originally Written by rsteam
The first value on the left.
The values of the mass air flow sensor in the engine section of the channel 10.
The first value on the left.
if you are considering changing the mass air flow sensor let lose and do not put even modules that are useless why? if they are not digital will always give a constant value to all the turns with dips up or down.
the mass air flow sensor it can be cleaned with the thinner nitro and back as new,trust me I tried a lot of times
Quoto on the inutilit? of the form. At the end ? how to apply a resistance, and it is not pi? taking into account the actual value of the air. The function of the mass air flow sensor ? what to do "mixture" as it was once made through the screws of the carburetors....
Summer, spring, winter and autumn, they were separate. With the mass air flow sensor, every moment ? for if, then from here one can see that the little/resistance, serves little...
guys, I also confirm.... the meter on, not only when he decreases the maximum value, but often it slows down its speed? in response, the other day I changed my 147 150 hp and I have to say that without touching the other ? much more schizzosa without considering that should be much more!!
it was enough to just wipe it off with thinner nitro, and returned again
definitely clean it or replace it and the best thing to do..
question:
but we are ..I have my mass air flow sensor means also went after various cleaning..that example output reaches max at 3.7v against 4.5v a mass air flow sensor in good condition
doing the calculations, it could not apply a resistance to return to the optimal value of the mass air flow sensor?
the said big?..and a question I have always asked.
you could put the resistance and maybe arriveresti to 4.5 v, but are you going to vary throughout the measurement range of the mass air flow sensor,you would get always the same mixture in all of the days with different temperatures,humidity? air etc
I had not thought to change atmosferisco
thanks for the explanation.
even I tried with the the hole but lasted very little, however, was pretty good, so it's best replacement do it before.
My occasionally goes berserk, it reads a high value to a minimum, and the machine is accelerated...To the high seems to be ok, with the reading of a max 78g/S, it seems to me...
Write permission
Quote