Problem Switch Off A6 3.0 TDI DPF

[gfr]

I'm sorry, but if you mismatch and a write error caused by the cks or from the interface , the rooster and the ori? you have to read it with another? I solved the thing by the cks with winols,

[Mr.Flash]

I want to clarify that all of the tests I did above, are made with BDM100 and KTAG why? by OBD not c'? to write anything with a variety of instruments.

I enclose the original flash.

thanks to those who contributed and to those who will take? do it !

I'm sorry, but if you mismatch and a write error caused by the cks or from the interface , the rooster and the ori? you have to read it with another? I solved the thing by the cks with winols,

I have used both BDM100 v1251 is KTAG..... always the same error result U0301 incompatibilit? software.
the checksum the correct interfaces in writing , I gave them the special file is not correct .
c'? to say that the same mistake he takes it even if I throw in the original flash!!!!!! and so we talk about a file with chk correct.

[gfr]

you're absolutely right, but between e2p and the flasks? you will be the ingippo then

[Mr.Flash]

and what kind of catch ? I e2p and the memory of the micro-I never changed....... any changes that I have done I have done only in flash.... ? this is what I can not explain..

[alfajtd]

edit the files, please do the checksum, winols as I have described before,
then write it in the ecu without farlgi the checksum to the instrument.

Let us know

[Mr.Flash]

edit the files, please do the checksum, winols as I have described before,
then write it in the ecu without farlgi the checksum to the instrument.
Let us know

exact, same thing that we thought....... and there we have also tried , but ? impossible..... why? if I use the BDM 100 load file says, "optimization", and the other not ? the checksum correction...... and KTAG doesn't say anything, but automatically makes the correction of the checksum the same.

I doubt that it is possible to write it without the BDM interface to correct the checksum.

[alfajtd]

Test with an old bdm vers. 1255

[ugoboss]

I only rewrite the flash changed............. ERROR U0301
I only rewrite the original flash............. ERROR U0301
I've rewritten the bdm backup original............ IT'S OK

The flash ? ori , the exhaust from the usb pen drive and the place immediately.

if you want to try to fere the evidence that I've said above in their sequence.

[Mr.Flash]

Test with an old bdm vers. 1255

alpha I tried with an old 1251 (what ? forever gone from god) and a far more new Ktag.... I don't think that it will be resolved with the 1255 . For? I have not been able to try because? I don't have one..

[Mr.Flash]

if you want to try to fere the evidence that I've said above in their sequence.

This you say ?

you can write the backup
then if all goes well rewrite only the flash ori and see if you get error
if all goes well try to edit a map in case I don't know injection and write it down
if you get error, you can try to write the rest of the backup and see if it disappears

I did it.... I wrote her backup OK
I only rewrite the flash ori ................... ERROR U0301

I have posted the file golds if you want to check, read by obd and bdm

thanks