Errecinque now I'm not at home, but I should return in the evening...as soon as I can you place the photo where you can see the various links. Blackwolf76 with regard to the adapter of the Bosch I remember to have used at the time,then I really do not I do this job and I would not like to give out false information. However, on that occasion, by changing the connections I have had no problem. Tonight I will post the photo hoping to be able to see the links. Good Sunday to all!
I attach the photos of the e xxx,I don't know if you can understand as much since the e xxx was completely wrong as links(I don't want to err, but was the same as the marelli as links,always with the almond eyes was something had to be wrong hahaa) in this way, my father has arranged.Perhaps it would have been cleaner as a job to unsolder the connector and redo them the links to the pcb via wires and keep it then which is not attached to the floor...if you can't understand the connections parts from the pinout that you used for reading with the wires soldered and they will redo the e xxx.Let me know how it goes, I'm curious to know if you've nabbed a e xxx like mine!!! here are the photose xxx siemens.rar
*giuseppe89
Thank you very much dear....now, I look for a in a demolition to do the tests. I would also like to understand if this change goes for all siemens with bdm or is only valid for sid 803
I think it is valid for all the sid, I read a 803 and 803a then I have not had the opportunity to try it on the other. But since we are there, the jump is on the 803a for reading bdm should be removed after the write, or you can also leave it connected? Type as the resistance dele marelli, which is then deleted
Maybe useful to someone...
66390d1307403053bdm100b.jpg
66390d1307403053bdm100b 2.jpg
"The only thing that stands between you and your goal are the********* continue to tell you why you can not reach it."
Thanks cinqueturbo at least it is much more clear to understand
Write permission
Quote