as the ecu code is located in the column light switch?
the body does not have the ecu code?
as the ecu code is located in the column light switch?
the body does not have the ecu code?
Hello michele, the antenna code and connected to the devialuci, the devialuci serves as the ecu code but be careful converts the signal read from the key and transmits it to the BSI via the network Van/Can you the rest is the BSI or the body computer, but if the devialuci does not work or the antenna is not working the keys are not in the codificherai ever..Originally Written by michele30
The patience and virtue of the strong..
my advice ? always the same, try to move the e2p
joseph I don't have the hardware to make this move.
but sorry for one thing, I must first solve the problem of comuicazione , the cio? the diagnosis that I can not do with the dimmer switch.
this machine was, then ? passed in other workshops and now no more, it may be that they did jump the switch? it's a strange thing, and then I tried connecting an old dimmer switch and is not to be the same diagnosis, may be that you have to skip the new body?
when I plug in both the body old body again , as soon as I plug the key on gear, leave the lights from the sun and the wipers and should always be.
Not c? communication between the switch and body you have to control the network van/can..
The patience and virtue of the strong..
the wires of the can network must be good continuity between the switch and the body and having an old switch I have also tried with another if entered in the diagnosis , but nothing. So I assume that it is a problem of the body , but the strange thing ? the machine when I ? arrived had two, the original and one that as I say it would be new but with both the same problem, it may be that they have broken 2 body according to you?
according to me should be the body, but I can't change another body because they are not safe
it could also just be a problem of configuration of the nodes, you need to configure the body if you want to come to**** if no, they are only lost words
type a proxi alignment of the right
c'? a procedure in automatic or do I have to do the one that is in the configuration and I have to say all of the things that has the car?
I use examiner's old but on the fiat (original fiat just make alignment proxy and configure the units excluded.
here, however, is not ? the same procedure
on phedra can't proxare does not exist, the function
and can, instead, that the one who has replaced the body (and again, if at all, and the same particular) have not configured the same, and then, and like to have a skull blank
Write permission
Quote