my first map...what do you say?

[munro]

also, all of the maps parts very soon with the rpm increase even if the load and the right(50%) part of the map the pedal where the parts, from 38% of the load....I don't understand then why in the map pedal request a maximum of 560nm but the lim torque the delimititi up to 891nm.....and also in this parts too, just a few laps already? with significant increases of 12% and over......
go more gradually from 1500 rpm up to 2500 about in all of the maps and then you can give linearly on the maximum percentage set..
also, according to me, you do not have a very clear idea of the functioning of the map "injection correction".....
for the various lim press I appended to the address of the magi if you request in the related maps a percentage as in lim are more low %???

[tuommo89]

after this jet in the towel......
the map of pedal ? enrichment in the acc?
the diesel fuel ? injection zoned right?

[tuommo89]

according to me you do not have a very clear idea of the functioning of the map "injection correction"....

in fact, that the map is=???? I have not made any progress....I was curious to see if I could do qlks decent with the help of only a guide.... =) BUT I KNOW OF NO ahahahahah

[tuommo89]

what do you think, if I like the first map from a point 1.3 mj 70cv? =) maybe ? better..... there are too many things to change x a newbie I cm!!!!

[munro]

tuommo placed the file does not download it tells me that file ? damaged....
is wide choice in the acc ? the map of pedal.....
while injection zoned are the injection time.....
the cio? how long you want to keep the injector open...
then ? diesel....
if you then want to start to moddare with something simple, leave the marelli which are a p? confusing but go edc15 jtd....

[tuommo89]

I don't know why I always error every time ke load...aspe ke stored

[munro]

you're almost there...if it weren't for the fact that always start from 1000 rpm to moddare could go....
parts moddare from 1400-1600 rpm in all the maps, otherwise if the parts to be 1000 rpm, you have a car that as you touch the pedal tends to squirt forward.....not ? the maximum in the traffic....even if I believe that it is automatic this car right??
however, don't give up you're almost there.....

[tuommo89]

automatic =) .......
I'm sorry with a girl, but how do you turn up the map, for example, not percentage, but for points constant? thanks =)
now edit and delivery from 1400/1600

[munro]

oh I forgot the lim torque can be improved.....
you always make the mistake of starting from 1000 rpm and immediately with percentages rather altine and with an increase in the total much higher than at the request of the pedal...
seeks to increase more gradually not discostandoti too far from the request map the pedal...
do not look only the percentages....
take a look to the nm in both maps....

[tuommo89]

here we see how it goes....
or increased a little arr.in acceleration, and lowered a little torque limiters ....and brought the mod from 1400/1600 rmp...well hopefully

but the map pedele cause smoke or what ? how many hp can I take with qst map?