light is turned on after preheating dpf removal

[munro]

fabry..try to do a proxy alignment of all the ecu with a scanner....
have you ever seen that works.....

[fabry]

ok on the 7th of January, bring me the car and let? various tests, sure that the proxy alignment ? a good idea,I do? know

[explode82]

for me depends on the file worked,but if you want to remove all doubt,put the e2p virgin and see what happens,of course you need to recode the injectors

[freddyecu]

Try to check the value of the spark plugs, why? sometimes alters and increases its resistance value ... The light comes on when the ecu detects a current consumption lower than that of the 4 glow plugs...

[legendaryslave]

for me depends on the file worked,but if you want to remove all doubt,put the e2p virgin and see what happens,of course you need to recode the injectors

but then ricodificarla not ? like the fiat, which incorporates the code in there I thought well I'm in this thing

[explode82]

I know,but ? easy if you memorizzatoi the error,it will not be easy to remove it with flash gold

[legendaryslave]

how ? finished this story because I defappato a meriva and 'tacchete' two days and light the glow plugs on blinking

[explode82]

Hi legend, I advise you to check the file in case it was wrong, then get gold azzererei all the parameters and write the file again and would check the spark plugs

[legendaryslave]

Hi legend, I advise you to check the file in case it was wrong, then get gold azzererei all the parameters and write the file again and would check the spark plugs

I have done all the procedures you change the oil and dpf before loading the file, the only thing that is not riuscto are doing a rebuild as it is already been physically removed the honeycomb will do the tests you listed thanks for the response

[jared_poe]

Hi to all, you are able to turn the light off at the end? Should I make it a few days, I read with gallo2 time ago, according to you, the time works with these ecu?

01246o204d
3422m166