I disassembled the turbine and the coperchiello from the exhaust side is commanded by wg remains slightly open, so I guess it is here the defect you say?
I disassembled the turbine and the coperchiello from the exhaust side is commanded by wg remains slightly open, so I guess it is here the defect you say?
if it remains open discharge pressure, so it may be...but do you understand why the wg does not work?Originally Written by Giuseppe2016
No, sincerely, but the wg and operated by the same turbine cache_500_1_1_img_877674_9070bfda8d44681821be0688dc956a89jpg.jpg
yes, I have in mind how it is made because well I have a 75 hp at home. Peroò makes me really weird that you don't function that damn auctionbut have you tried to move it up and down in the hand the wg when you smonatato the turbo?
and it also moves by blowing with the air in the wg rod walks "now", while before it was blocked, however, when the wg and the whole closed and then without the pressure of the air that opens the hood which is in the part of the turbine exhaust remains for me to slightly open
Regulates the wg to keep it closed at rest,often these turbines in case of frontal impact, the dell drive to rotate the casing, the cold side on which is attached to the wg moving so the adjustment...or perhaps if it was replaced, it was installed wrong. Calibrala and see that the car will be fine
fixed with the turbine new was ruined, and there remained the wg within a thousand thanks to the next
Write permission
Quote
