Parma... lontanucci
Oh I know, unfortunately the cock on the bench does not want to know of those ecus. For the scodifica you are obliged to read the 95160 I don't know what you have changed to the sw into the dedicated file to the management engine but I would advise to upload the processed file.
Then I have read only the flasks motor uff vabe I have to unsolder, do I need a orogrammatote to you what do you use?
However, the flasks that size???
The flash in this ecu would be the micro and I've written in the previous pageOriginally Written by tac89
I used the ktag, the procedure for the reading tour is the same as the rooster, if not easier because you do not have star them to attach and detach the cable of the boot.
To unsolder and do a good job without the risk of compromising the eeprom you would need a soldering iron to the air. However, at the most, the 95160 with 2€ you ship it to new home new.
For programmers, I don't know because I do not own but perhaps the upa should be alright.
The only way left for me to help if you are not programmers and don't want to wait too long, the customer would be to send you a 95160 already written ready to be welded or if you can find it online.. according to me would be a possible solution.
No customer can wait for the machine to and from the carroziere then I still have a week good I have purchased a Willem so much back, always useful
hello do you place the strings that I used for scodificare the ecu. can you please post the total and the partial, I only tested the total though.
TOTAL the string named 0090 = FFFF 0000 0000 0000 40F4 FFFF 0055 6B0C
00A0 = FFFF FFFF FFFF AD55 0000 0000 0000 0000
PARTIAL string named 0090 =FFFF 0000 0000 0000 0000 FFFF 0155 0000
00A0 =FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF
Thanks just get the programmer, I feel the strings and I want to know thanks a lot
As you said the total works but the code on the right?
It works perfectly with light code turned on,they say it's normal but I tried this ecu scodificata on a car with already a another ecu scofidica and with her the light does not turn on... so the way to not make it turn on there is no, but are aware of it
Quote
