How many boxes have you rescaled?
How many boxes have you rescaled?
There is no need for riscaliate all the columns. Calculate the time you need to 80mm3 and you write in the last column. In the penultimate copied equal par values, gold for 70mm3 and go to inform the ecu on the curves of the Bp-axis mg, bringing the second-to-last bit in the 7000 and 8000. Obvious that on all the maps, which bear on the axes of the mg these must be modified as above, and calculated the values of the Z-axis to the 80mm3
I do not understand. You only need to update the last column?there is need mod from 50%of the load and 1500giri?
Ah understood then!what a fool I riscalavo all..For example in this case edc15c7 the last three columns, i.e. 90 95 100 load are identical then you could leave the 90's so that is already to 70mm3 that of 95 to 75 mm3 and that of 100 of the load for the 80mm3 then go to the bp at the beginning and as it says in r5 to change the last bit to 80, and the second-to-last in 75 and the last is already 70! Right???so it seems to me that it makes sense
Modificamdo only the last two columns, I think you don't hear much difference in the car
This beautiful.....ahahahaOriginally Written by aleg
Yes indeed then 80 mm3 you would have only 100 of load already you could do the last three of 80 mm3 to make it a 75 in place of the ori 65 and move the one that is 70 instead of 60..but so it seems to me exaggerated and strange because as you say usually making it, in percentage, from be from 1500 while in this way you would increase already at 900 rpm..I don't know I'm confused
Ok errecinque you convinced me not to tryas soon as I place a draft!
Wait david, let's see what he says. But you know what value to put for 80mg?
To me that would calculate all the values of the columns 75 and 80 with the proportions and in the same manner also calculate the advances surely is a somewhat crude..I don't know 80/70=1.14 for es 795×1.14=906 us doing the same thing on advances would be off 3 degrees or so considering that one should be 43 but this with rail 1350 raising the rail will serve less advance..I don't know this is what I would think surely there will be a formula that simplifies it all, or maybe my reasoning makes water from all sides!
Quote
