the bosch me7.9.10 read / write port:we clearly

[andrea80]

You. ..kess law that dimension and is recognized automatically by the Titanium. ..the cock is a reading of a different length and the file to be cut x recognize it to titanium

[munro]

only the kess v1, I think I understand the v2 law, however, a file from 896k but not serial...
the tread is trying to do chairezza there is no confusion if you want to post something that I would be a little less hasty and describe their experiences.
Thanks

[andrea80]

I didn't mean serial...but read in boot.....with the kess v2 to read the files that are already suitable x titanium...more clear as well. ..the cock is a reading of a different length.

[andrea80]

At least...I have read a couple in the boot with kess v2 ....in the serial I do not dare...to read or to write...

[andrea80]

In fact, Munro if you notice I have asked for the photos of the process x, and put it in the boot with the rooster if there is I have is I have never tried. ...

[tranky]

no one knows anything?

hello, from what I know, for the indirect experiences (friends of the profession to which I asked for) told me that between the addresses 8000->18000 (hex dump) on the file from 832k are missing, in fact, by integrating this part you get to the size of the file is 892k.
I don't know, honestly, the content of the missing part, perhaps the e2p, I don't know... I shot them..
Word to those who work there every day!

[andrea80]

To make a short summary:
-Reading in the boot with the rooster: file 896kb
-Reading in the boot with other tools (e.g. mpps): file 832kb

For moddare the file, if we were to read with the cock we have to follow a couple of simple steps.
Materials needed:
-Read in bootmode by 896kb
-Sw editing for chiptuning or hex editor

Our goal is to eliminate the first 64kb, to do this (I will use the example sw of editing moltoconosciuto Titanium):
-Tools ---> Conversions ---> Cut/paste file
-Let's click on "user defined" in item "save file" on the bottom left in the start field, insert "010000" leave unchanged the field "end"
-Let's click on the button "save"
-We finished, now our file 832kb is ready and our beloved sw of editing recognize the file properly

To write it again just do the reverse operation and bring it back to its original size by adding to the file from 832 64 kb cut

[munro]

can we please avoid spamming the thread?
the title, and read/write serial me7.9.10 it seems to me that no one has asked how to read cut write a file to this ecu in the boot among other things, when you add the 64k missing file from 832 the cks becomes wrong.

[andrea80]

How?? We were talking about lengths, files, etc etc... this is spam?? An explanation how this is not spam. ..then you do...for the cks have added you...what should we do?

[munro]

the procedure that you posted is also wrong according to me because

just cut 10000 bytes to partiere from byte 8000, not from 0!!!



And you can switch between Gallo, CMD, Alientech...



The only difference between a buzzard and the other tools are the 10000 bytes between address 8000 and 18000.
it means then that



The checksum is only correct on the final version. It means that to make the correction on a file, 832kB, and enlarges on 896kB will not work.













the procedure used is the following:



Open the ECM Titanium, (but even the 2001 is the same)

Open the read file in the boot (obviously will not find the driver)

Open in the menu TOOLS->CONVERSION->CUT/PASTE FILE

Select USER DEFINED and put as the beginning 000000 and the end 007FFF and click on SAVE as, call it as you like

Select now as the beginning 008000 and end-of-0DFFFF click on SAVE and name it according to how you think

Close the window and go to TOOLS->CONVERSION->CONCATENATE TWO FILES

Select first.cnk and give ok, then the second.cnk and give ok and it will eventually ask you where to save the file .ECM give the name that you want and save

Now open the ecm file that you just created with the extension of the ecm, and should rilevarvi the driver with correction of the checksum, and should be writable with mpps, etc, etc,