try on some the ecu works and that's fine, I repeat without spending a dime but do not tell too much around me, I recommend
try on some the ecu works and that's fine, I repeat without spending a dime but do not tell too much around me, I recommend
And you didn't even file ori?However, I meant the version of the sw.
on the opel works on the alfa no, you need the file, I have all of them if you want to put them
great thanks, I definitely will come back? useful the next time!
I have tried to upload a file from the package "serial", but it did not work.
The writing gets to 100% and hangs. then the ecu data are a casino. Fortunately, it was possible to rewrite it in the boot.
I have this:
Bosch HW: 0261204947
Bosch SW: 1237350390
Fiat HW: 46768490
ECU not coded
Max KM: km 189601.48
Date progr.: 18-10-2005
Max Revs: 7320
Programming: 7
Crc Errors: 254
can someone explain how to do it.
Okay , I managed to do it.
The recipe :
1: put in the boot and load the file "Alpha 20 TS m1.5.5.bin" - the version is not compatible but that is not important.
2. turn off the unit for 30 seconds
3. Turn on for 30 seconds (normally)
4. power off for 30 seconds
5. put it in the boot and loads the original file 350390.ORIGINAL.BCB
6. Off the immobox under the steering wheel
7. Connect and turn on
the fact
All this stuff I found around the various forums and post here for you.
BOSCH_M155_FIAT.jpg
ALFA_ME155.jpg
1.55Eprom.jpg
0261204949 - immo off.rar
made last week put in the boot loaded the file that generates ecuvonix detached immobox the machine is in motion and returned toOriginally Written by spiki_x
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
But you put after the original file?
Because the file ecuvonix not coincide with the number of Hardware
No I left that file, and the car is still turning
while the others are still talking about us, we have already solved the problem
GARAGE0864 ԼЄƓЄƝƊƛƦƳƧԼƛVЄ
Write permission
Quote