opinion the map peugeot 1.4 hdi 68cv 707-160

[voglioimparare]

By increasing the torque limiter does not burn the clutch, but the slide only...increasing torque, you can say that the engine reaches that pair, and if the engine fails nothing happens...if the clutch ? new don't hear anything with a clutch lady slide only...the torque limiter must be increased in a gradual manner starting from 1500 - 3000 rpm, and then 20 % then 30% and another 20 % and you'll see that the machine will be? perfect...when you want to edit a file, look always to the technical details of the machine can never be wrong and then look at the maximum torque that can? reach and do mappings always better than others

you mapped a few 1.4 hdi you see, since if you exaggerate with the lim torque slide the clutch. then if your maps make a long clutch 6 months now, and my life of the machine, this is a different discussion. to look at the technical details of the machine you go to the map I didn't understand it.......

[ake85]

maybe you didn't read that right the first thing I wrote in an increase in as my ? an increase in standard and nothing happens other that 6 months is not the case and not the sled for nothing...you remember that ? a limiter, not an increase in performance then I can also 50 nw but if the machine fails will stay? always that a pair of standard...here we are not doing a competition to see who ? pi? strong we are here only to help people who may know less than we do...each one follows a mapping as it sees fit, and then going in 2d and you can never get it wrong... if you don't understand the famous card technique best applies to those who have understood well what I wanted to say...

[studio82]

thanks ake85, you're not arguing ? just what ec you said we are here to learn, today I have dedicated myself to redo the map with some increases in the place immediately to unconsulto with you!!!
thanks again for the help that you give me!!

[ake85]

I'm sorry the studio, but I can't read the file...the advice I can give ? always read the numbers and understand what you read and see the maps in 2d in order to understand what you have done...to see if the ecm tells lies or says the truth? studies always the technical sheet of a car, go on ****** and write for example data sheet of a ford fiesta 1.6 TDIC 90 HP and you can read that in the couple develops 110 nw and laws if the ecm is the same value...only do maps always better than others and only trust a few and I say few running changes with a policy or perhaps just to hear you say...