The additional control unit obd (race chip galaxy)

[rodcraft86]

and most importantly, the cost ? too low compared to a normal module of quality

[Polabarth]

In principle, the modules that hook you and sensor type in the form marelli can do damage?

[rodcraft86]

much depends on the degree of intervention they offer, their purpose ? to lower the signal of the sensor rail and turbo by believing in the ecu that tyre pressures are lower than normal and, therefore, the ecu compensates for this gap increasing, pi? ? the lowering of the signal and the greater the pressure, beyond a certain limit that you can't? anyway go and why? the ecu goes into recovery but gi? avvicinadosi that threshold you are likely to have long-term problems.

[Polabarth]

I was looking at the magneti marelli for the 500 Abarth turbo petrol pu? the damage is done?

[rodcraft86]

we do not know, should be measured with the maximum pressures obtained after assembly and compared with those of a map made as it should be

[Polabarth]

I believe that you come around to the 1.5 against the 1.2

[Exelion1986]

sorry a question... how much is this form?
you have not taken into consideration a mapping rather?

[riccardo59]

these modules will surely come products in china for 1 euro per kg for this have a very low price.-

[Polabarth]

Are on the 400 was an alternative plug and play to the map on the workshop, me recommended it why? Marelli collaborates with the Abarth

[Exelion1986]

at that price I would say the mapping of the safe
years ago I bought a module for diesel, not the economic ones, in fact it cost 360 €
he also had the chance? to customize the two maps work on turbo pressure, and the rail
but the pi? nor less, and could act only on these two parameters, and to make the car decently, I had to adjust it quite high, to the limit of the recovery
thus, in practice when schiacciavo the accelerator at times I went out the pencils from the drain by a lot of smoke was
it was clear that he was working completely outside the parameters, but to force, the adjustment was too coarse and also if I was pi? low the effect was not very noticeable
additional modules for gasoline I've never tried, but, considering that these engines are more? sensitive to certain parameters, personally I do not trust too