Mapping EDC15C7 Alfa 147 115hp 332 536

[gionag]

With the attached map, I have the machine that arrived at 2500rpm (little more? little less) with the pedal at 100% it seems as if walled up, not good rooms, arrived at around 2900-3000 rpm starts to go.
depends on what do you think ? the problem coincides almost perfectly with the changes you have made all apressione rail.

Open to advice !

[gionag]

I took a step back.. the management of the vnt was wrong now, I would keep the stock and try again, I make a nice track and I can see exactly where and if correct.

I would like to try this map, you have found something wrong ?

-> Alfa_147_332-536_step_10.zip

the eye that the breakpoints were spostasi back one, and then some of the tables seem to be completely changed, but were simply moved out of the/the value/the minor (rarely used) to make space for the new columns.

Thanks

[gionag]

I would blame the map of the vnt the fact that the pressure was not stable, but instead I got the map sensor is completely blocked by the suck of the inlet conduit.
at the moment I clean very well and the machine is v? great.
tomorrow I would like to try to climb to 90mm3... let's see what happens.