Outlet Diagnosis-Obd Fiat Bravo jtd 100 hp 2001

[dvdtuning]

Thanks to all for the information...

[gfr]

also the one with two wires is f? ..but you just have to build an adapter with the wires that attacked them directly to the jack..and take the power from the battery

I agree with the positive to be taken and everything is ok!

[cattivik]

cable self-made in 15 minutes... which is very useful to use as a support to autocom if you dont have the specific cables or other self-diagnosis

[giarras]

you first buy the cable that costs very little.

[isfedale82]

if you give me your ***** I am sending you 2 screen with the different pin out of the ecu,I can not post it here, otherwise you don't see them.

anyway, K-Line: control Unit Connector A - Pin 48 or round connector on the vehicle Pin 2.

text amended by admin msport,need to first introduce yourself and read the rules and then make requests in the forum that is not a place where you can go to make their comfortable and leave thanks.

[isfedale82]

thanks

if you give me your ***** I am sending you 2 screen with the different pin out of the ecu,I can not post it here, otherwise you don't see them.

anyway, K-Line: control Unit Connector A - Pin 48 or round connector on the vehicle Pin 2.

[msport (exil77grande)]

thanks

I'm sorry, but my response that you quoted, if you read carefully it was addressed to the user dvdtuning,for you a little bit and you will see any screen etc.

[klajdin]

guys if you take adapters type autocom check the pins on the socket fiat 3-pin the wires are invetriti, jack iveco 30 pin both mass and positive are reversed

[carbo92]

guys if you take adapters type autocom check the pins on the socket fiat 3-pin the wires are invetriti, jack iveco 30 pin both mass and positive are reversed

I have the cable fiat reversed, how can I solve the problem? Do you have a diagram?
Thanks

[cicciogsr]

I have also the adapter, 3-pin, and I realized that c'? something that is not v? why? feeding the cable interface does not turn on