Autocom box gold...dead help!!!

[matteo87]

if you go to device manager on the pc you see it??

[sno74]

Throw it out surely ? a welding controls, especially the micro...........

[tech]

Good day to all ? for the case that happened to someone that the autocom after a "small" impact on the aluminium box is not working more???

...Or better, he turns on but does not recognize the interface, I do the test but does not recognize it give me error with the num of series


if ? gi? happened to someone can give me advice??? ....thanks

In that sense you get error with the serial number ?What tells you specifically?

[hftdelta]

Check out all the tracks and the components that you do not loose

[matteo87]

if you go to device manager on the pc you see it??

I wrote this because? it may have lost the ft232

[rts]

The pc sees it and recognizes the n series, which first appeared in green-and-now ? in red.

[giuseppeturbo]

Have you tried to change the usb cable?

[sa80libero]

in the device manager gives you the yellow triangle?

[tech]

The pc sees it and recognizes the n series, which first appeared in green-and-now ? in red.

Seen that take the test and you get error on the serial number ? likely that in botta, who has taken the VCI, the rom avr? lost the serial number;
Have to enter the serial number in the VCI..... if I'm not mistaken, somewhere on the forum there was a program that allowed you to delete the serial number from the VCI and re-entering a new one in your case delete the old serial number and re-enter the serial number !Of course, the serial number that you enter must be equal to the one you used during the installation of the software on the pc !
Try and let us know !

[rts]

Now I'm trying to reinstall everything, and she has to rewrite the serial number....let's see...thanks for the tips.